Fishing for trout has long been a passion of mine. Now I’d like to share with you what I’ve learnt about trout and how to fool them over my four decades of fishing for these wily immigrants.

Does a 6 night luxury bluewater adventure sound like you? Well, considering this is some of the best, untapped fishing I’ve experienced, you have every reason to get excited! FIND OUT MORE by clicking the “go to link” icon that shows when you roll over the image above.

Fancy joining us on a fly fishing jaunt to NZ? Enjoy 6 nights of 5 star accommodation, all meals and some of the best sight-casting for browns that you’ll find anywhere. FIND OUT MORE here…

Here’s part of a blog I wrote for a great site called Fix.com  If you’d like to view the piece in full, there’s a link below the graphics. Source: Fix.com To read the full story, click...

For those who missed it. I’ve attached my recent feature on catching big bream on flies from “Barra, Bass & Bream Digest” magazine. And in case the text from the magazine layouts is too small to read on your screen or in this format, I’ve also included the straight text at the bottom of this blog post. Also, if you’d like to find out how to purchase or subscribe to “Barra, Bass & Bream” on-line, go to: http://www.nafa.com.au/ Big Bream On Fly The Ultimate Challenge? What’s the ultimate prize in modern day barra, bass and bream fishing? Catching a metre-plus ’mundi on a surface lure and light tackle? Landing a 60 cm wild bass from a kayak? Pulling a 2 kg bream onto a wave-washed rock ledge in the middle of the night? Starlo rates all of those milestones, but reckons there’s another one that presents even more of a challenge. In his opinion, mastering big bream on fly is the toughest (and perhaps the most rewarding) game in town… Read on and see if you agree! The average, weekend angler no doubt struggles to understand why some of us might actually choose to make our fishing any harder than it needs to be. For many hopefuls, simply catching a feed of fish is a daunting enough prospect, without deliberately adding extra layers of difficulty to the process. Yet, as with any endeavour, those who are seriously engrossed in their passion and spend a lot of time pursuing it eventually look for extra layers of challenge: new peaks to scale and higher marks to attain. In preparing to write this feature, I spent considerable time pondering the bigger challenges fishing has presented me with over the years. In my late teens and early 20s,...

Seems to be a bit of interest in this subject at the moment, so I thought I’d re-blog it! In the preamble to this series (“So, You Want to Be A Fishing Writer?”) I talked about how I got started in the industry that has ultimately become my life’s work. Within that first blog I used the word “passion”. To my way of thinking, having a genuine passion — not only for fishing itself, but for wanting to communicate with others about it and to see your own work in print — is the single most important ingredient in becoming a published fishing writer. Stop and ask yourself right now if you have that passion. If you can’t honestly answer in the affirmative with a resounding yes, then your chances of success are very low. Now, go a couple of steps further and ask yourself these important additional questions: Q1: Are you passionate enough to become an effective communicator, and to ultimately share your passion with others? Q2: Are you passionate enough to cope with repeated failure and possible rejection without losing heart and giving up? Q3: Are you passionate enough to accept that you might never make much more than “pocket money” out of your writing? The passion shows… But what fish is that? If you unhesitatingly answered yes to each of those questions, then you might just have what it takes to actually make this journey. If you do, and if you stick with me through this series of blogs, I promise that I’ll do my best to help you get your first fishing story published… When that happens, you can buy me a beer! Okay, let’s start off with some practicalities. What skill sets do you need to potentially become a...

I’m really proud to have had my work published in a fantastic on-line “e-zine” called “The New Fly Fisher”. While it’s based in Canada and devoted in large part to North Americanj fly fishing species and locations, “The New Fly Fisher” also carries international features (such as mine on catrching barra and saratoga), along with lots of great gear, technique and fly tying information. It’s loaded with video clips, too! But, best of all, subscription to this wonderful quarterly mag’ is completely and utterly FREE! All you have to do is register here (by clicking on the ‘subscribe now’ tab at top of their home page). Once you’ve registered, you’ll receive an e-mail notification and link each time a new issue comes out. If you’re into fly fishing, fresh or salt, I guarantee you’ll get a lot from following this electronic publication. But even if you’re not a fly fisho, I reckon you’ll really enjoy the photos and videos! Check it out… I guarantee you won’t be disappointed! Anyway, I’ll leave you with a few random spreads from my first feature for “The New Fly Fisher”…...

The WordPress.com stats helper monkeys prepared a 2013 annual report for this blog. Here’s an excerpt: The concert hall at the Sydney Opera House holds 2,700 people. This blog was viewed about 47,000 times in 2013. If it were a concert at Sydney Opera House, it would take about 17 sold-out performances for that many people to see it. Click here to see the complete...

Here’s an earlier blog that launched a popular series…   Over the next few Soft Plastic Secrets blogs I want to have a good long look at the fascinating subject of customizing soft plastics. In my opinion, this is an avenue of tackle tinkering that far too few anglers explore. Most buy their supplies of soft plastics from the store and seem to assume that these versatile lures must be used in exactly the form they were packaged in by the manufacturer. In reality, nothing could be further from the truth! Perhaps this notion that the maker knows best and that anglers shouldn’t “fiddle” with their products is a carry over from the world of hard-bodied luring. Beyond perhaps upgrading or replacing hooks and rings, very few anglers actively modify hard bodied lures made from metal, plastic or timber. There are exceptions to this rule, of course. For example, some switched-on trout chasers have been adding bright, pea-sized red spots with lighter-coloured halos to their minnows, plugs and spoons for years, especially when fishing the pre-spawn and post-spawn runs of trout in autumn and spring. I first helped to popularize this custom colouration almost three decades ago, and gave it the name “spotted dog” in my writings. That label has stuck, and has even been picked up by some commercial lure makers. But I certainly can’t claim to have “invented” the actual spotted dog pattern. In fact, it was first shown to me by a very canny Finnish trout fisher in the early 1980s, and it had been used in his home country (with great success) for at least a generation or two prior to him telling me about it. There is very little under the sun that is truly “new”! The spotted dog...

It’s not every day that you get to launch a comprehensive range of hard-bodied lures and semi-soft topwaters onto the Australian market, knowing that each lure will retail for $10 or less, yet still be an excellent fish catcher, with a classy finish and better-than-average hardware. However, that’s what I’m happy to say I’ve been able to do with my new STARLO PRO Lures range, designed and selected by me exclusively for the BCF chain of stores here in Australia. Now, I realise from past comments here and elsewhere that not every Aussie angler is necessarily a huge fan of BCF. There’s no doubt that the big chains (including BCF) have led to the demise of some small independent tackle stores, just as the competition from Coles and Woolworths has resulted in a reduction in numbers of local grocery outlets, butcher shops and so on. Nonetheless, for better or worse, I suspect there’s a certain inevitability to this sort of evolution in the world of retail. It’s also true that the better independents (in all fields, including fishing tackle) will not only survive but thrive in the face of such competition. They achieve this by providing the sort of expert advice, individualised customer service and “value adding” that most chains simply can’t or won’t offer. Meanwhile, BCF and their ilk do provide an excellent service to a great many customers, employ a heap of Aussie workers in the process, and don’t, in my experience, indulge in the sort of “crazy, crazy, crazy!” unsustainable discounting that could damage the industry. So, I’m more than happy to be involved with sourcing and designing exclusive lines of tackle for them, just as I have on occasion for other companies.         Anyway, if you’d like...

In the first part of this blog series on spooling up your reel, I looked at attaching the end of your line to the spool of your reel before beginning to crank all that line on… Now it’s time to work up a sweat as we finish the job! Hopefully, you’ll remember that in that first part I instructed you to fit the reel to a rod, run the end of the new line down through at least one runner, wrap it several times around the spool core, then secure it firmly in place with a five or six turn Uni Knot. I also stressed that if you’re filling a spinning (threadline) reel, you’ll need to open the bail arm first, before attaching the line, while if it was a baitcaster, the line would need to pass through the level wind carrier first. After tying that important Uni Knot, tightening it firmly and trimming the knot to leave a one or two centimetre tag, you can actually begin spooling up… This is the physically active part of the process! (Note that if you’re spooling with braided or fused gel-spun polyethylene line, lots of people suggest laying down a base of 15 or 20 metres of mono first and tying your braid to this. To be honest, I don’t usually do this, but it’s not a bad idea.) TO READ THIS REST OF THIS BLOG SERIES, GO TO “STARLO’S INNER CIRCLE”, BY CLICKING...

Check out this great clip produced by the guys at “The Offroad Adventure Show”! [youtube=http://www.youtube.com/watch?v=uBrTANhJZMQ&w=420&h=315]  

Most modern fishing reels, regardless of their style or type, are equipped with a drag or “slipping clutch” mechanism of some sort that allows line to be pulled from the reel’s spool under a pre-set tension. On a threadline or spinning reel, drag pressure is usually adjusted via a knob located on the front of the spool or (more rarely) under the rear of the reel’s body. Overheads and baitcasters either have a star wheel under the handle or a lever on the side of the reel for adjusting the drag, while sidecasts and centrepins typically feature a nut or star in the centre of the spool. This drag is intended to prevent the line from breaking should excessive force be placed upon it. Instead of snapping, line slips from the spool against the pre-set drag tension. When a large or powerful fish is hooked, it usually needs to be “played” using a combination of drag resistance and rod work. The term “playing a fish” means taking your time and bringing the fish in more slowly and smoothly while using the flex of the rod as a shock absorber. If necessary, you will also need to allow the hooked fish to “run”: in other words, to pull line from the spool against the reel’s pre-set drag or slipping clutch. This may happen many times during a fight with a strong adversary, especially on lighter line. A big, strong fish can easily pull the rod tip down and rip line off the spool against the resistance of the reel’s drag. However, if the drag has been set too tightly, the line can possibly snap, or the hook might bend or straighten and rip out of the fish’s mouth. On the other hand, if the drag...

For those who missed it first time around in print, here’s a piece on open water bream luring that first ran in FishLife magazine earlier this year: The art of luring bream has been one of the major engines of change in Australian sport fishing over the past few decades. In less than a single generation, catching bream on lures has gone from being an accident or a novelty for most anglers to a regular pursuit for many. Even those who don’t “get it” and wonder what all the fuss is about must grudgingly admit that the pursuit of bream on artificial baits has completely transformed our sport. Before many of you reading these words were born, that doyen of Australian fishing writing, Vic McCristal, offered the opinion that anglers skilled enough to regularly take bream on lures would tend to find most other species easy. It was McSea’s quietly understated way of doffing his cap to the bream clan as perhaps our most challenging piscatorial targets. What Vic could hardly have guessed in those days was the passion with which this country’s sport fishing community would eventually embrace that particular challenge, and how doing so would completely revolutionise our tackle, our techniques and even our angling mindset. Make no mistake: bream luring has radically altered the shape of Australian fishing, and this significant evolutionary upheaval is far from having run its course. Discoveries remain to be made. For many, open water breaming is just one of them. Middle Of Nowhere For most of us, thoughts of catching bream on lures immediately conjure mental images of structure fishing: accurately casting our soft plastics and little hard bodies at shorelines, rocks, snags, pylons, oyster lease racks or moored boats. But what if I told you...

Check out the latest of the “Rituals Of Fishing” series from Shimano, featuring yours...

In mid-September, 2012, my wife Jo and I were lucky enough to sample the extraordinary fishing on offer around the remote Cobourg Peninsula, north east of Darwin, as guests of a wonderful operation called Venture North Australia. Owned and run by affable brothers Aaron and Hugh Gange, Venture North has historically been an eco-tourism, wildlife and cultural-experience guiding operation offering a little casual fishing on the side (usually aimed at catching dinner). However, earlier in 2012, all that changed with their purchase of a Darwin-built, 7-metre CustomWorks Eliminator plate alloy sportfishing boat powered by a 225 HP Yamaha four-stroke. To say the boys have made a decision to take the fishing side of their business a lot more seriously would be something of an understatement! Interestingly, my good lady Jo was partly instrumental in this significant upgrading of Venture North’s fishing focus. While looking at the Gange brothers’ website in her role as a marketing consultant, Jo noticed quite a few photos of big fish. She asked why they didn’t place more prominence on this aspect of their operation, and her comments obviously got the guys thinking! Less than a year later they’d bitten the bullet, bought the big boat and significantly ramped up the angling side of the business. As something of a thank-you to Jo for her advice, Aaron and Hugh invited her up to Cobourg for a few days, and mentioned that she might as well bring her old man along, as apparently he didn’t mind a spot of fishing, either! Back to Cobourg As our light plane banked in over the broad, sparkling expanse of Cobourg’s Port Essington, I reflected that it had been at least 25 years since my last visit to this fantastic part of the world… Far...

Saturday, 21st July, 2012 saw the staging of the second annual Barra, Bass and Bream Digest Harbourmasters’ Invitational on the waters of Darwin Harbour. In stark contrast to last year’s event, a cool, windy dawn greeted the 41 keen competitors who made up 21 teams taking part in this year’s BBBDHI, and the stiff sou’ easter continued to build throughout the morning, peaking at close to 30 knots before subsiding a little in the early afternoon. The aim of this unique one-day tournament is straightforward enough: go out and catch as many barra and bream as you possibly can on cast-and-retrieved lures or flies (trolling, bait fishing and berleying are not allowed). However, where it gets really interesting — and very different to any other Top End fishing competition — is in the final scoring process. Only the combined lengths of the longest barra and the longest bream taken by each team actually count towards their final points’ tally. And, critically, one species doesn’t rate without the other. In other words, you could theoretically land a metre-long barramundi (a monster by Darwin Harbour standards), yet still score zero points, simply because you’d failed to catch and record a bream! Unique concept My wife (and fellow writer/presenter) Jo and I devised this unusual event in an effort to effectively force Top End anglers into thinking a little more seriously about the vast schools of bream that frequent our waters, especially during the cooler months of the Dry Season. In the past, most Top End fishos have been quite dismissive about bream and bream fishing. Yet, with my southern background and years of competing on the bream tournament circuit, I know just how challenging these little buggers can be to catch! I wanted a way of sharing that challenge...

Welcome to the first instalment of my “Back To Basics” series of blogs. These blogs are derived from my ongoing series of columns in the Australian Fishing Monthly group of magazines (QLD Fishing Monthly, NSW Fishing Monthly and VIC Fishing Monthly). Publication of these blogs will lag several months behind their first appearance in those great magazines so, if you want to jump ahead at any stage, just grab the latest copy! However, the appearance of these columns as blogs also recognises the fact that many people live outside the areas covered by those publications, or may wish to catch up with previous columns that they missed in print. As the category name of this blog series implies, it’s all about the fundamental building blocks of our sport, but that certainly doesn’t mean it’s intended purely for beginners… far from it! Lots of experienced anglers could definitely benefit from re-visiting some of these basics, and I’d like to think that even the guns of the sport may pick up a gem or two from reading these columns. In coming blogs within the “Back To Basics” category, we’ll tackle subjects like filling and top-shotting your reels with line, selecting and adding leaders, setting your drag, hooking, fighting and landing fish, handling the catch, improving your casting, putting baits on the hook properly, “working” and tuning lures, organising and maintaining your gear and a whole bunch more. However, if there’s something you’d specifically like to see covered, please leave a comment here under the blog and tell me. You can also reach me through my StarloFishing page on Facebook. This time, I want to kick off with an aspect of  tackle preparation that’s glossed over in many how-to books and DVDs, but which is critical to...

In mid-June, 2012, I was lucky enough to capture (on fly!) what may well be one of the largest queenfish ever taken in Australian waters. Here’s the story of how it happened… For keen anglers like myself, the Dry Season is certainly a fantastic time to be living up here in Australia’s Top End, especially when one intense low pressure system after another sweeps across the southern half of the continent, and the incessant trade winds ease a little north of the Tropic of Capricorn. It’s an old rule of thumb that crook weather down south means happy days up top! A spell of exactly such magical Top End weather around the middle of June this year saw my wife Jo and I venturing offshore in our 4.5 metre trailer boat to chase the abundant Spanish and broad-bar mackerel, longtail tuna and other pelagics that were pounding bait schools not far from Lee Point, in Darwin’s northern beach suburbs. The fishing grapevine had been buzzing for a few days with news of everything from queenies to giant herring smashing bait in this area, and Jo and I had been chafing at the bit to get amongst them, but found ourselves repeatedly frustrated by work and family commitments. When we were finally able to get away, it was obvious we’d only just caught the tail end of the hot bite, but we still had plenty of fun on the macks and tuna, coming home with a lovely meal or two of fresh fish for our troubles. Fly rod shot Two days later, I headed out again, this time on my own, and with the 9-weight fly rod rigged in the hope of tangling with a few line-peeling pelagics. However, as soon as I rounded East...

Over the course of a year, I get to talk to a lot of soft plastics fishers from around the country. Some I meet at seminars and shows. Others I chat with via the various pages on Facebook that I run or help to administer (especially the StarloFishing, Fishingscool and Squidgy Soft Plastics pages), or through my blogs here at www.starlofishing.me Still others send their letters or emails to me via the magazines I write for. However, no matter what the source of the enquiry, one question (or variations of it) dominates the calls for advice that I receive. Typically, that query begins with the words: “What’s the best soft plastic for…?” The rest of that sentence almost always contains a species of fish and a precise location: What’s the best soft plastic for bream in the Patterson Lakes? What’s the best soft plastic for trout in the Murrumbidgee River? What’s the best soft plastic for flathead on the Gold Coast? What’s the best soft plastic for yellowbelly in the Murray? What’s the best soft plastic for redfin in Lake Eildon? What’s the best for barra in the Daly? And so on… I can’t help but smile at the geographic specificity of these well-meaning questions. Anglers clearly have their favourite fishing spots and they seem to expect that the fish they chase in these beloved haunts will behave just a little differently to those living down the road, around the bend or across the border. Generally speaking, this is not the case. I’ve caught redfin perch in the New England rivers of north western NSW, and also in the very “old England” rivers around the historical university city of Cambridge, in Great Britain (where they’re simply known as perch). Rather unsurprisingly, these fish looked...