In the opinion of many anglers (myself included), “sight-fishing” is the most exciting form of fishing ever devised. Seeing your prey before you make a cast and then watching its reactions to your bait, lure or fly lifts fishing to another level altogether, and really ratchets up the “hunting” aspects of our wonderful pastime… It’s also highly addictive! Whether you prefer to use natural baits, lures or artificial flies, I believe that there’s simply no bigger thrill in the whole wide world of fishing than sneakily stalking your visible prey, carefully placing your offering in front of it and watching what happens next. I defy anyone not to hold their breath and tense every muscle in their body with delicious anticipation as that target fish closes in on the trap you’ve just set. It matters little whether it’s a beautiful, wild brown trout tailing in the margin of a shallow lake, a fat, blue-nosed bream mooching under an estuary snag, a lumpy golden trevally hunting across a tropical sand flat… or even a stinky old carp mooching through the shallow margins of an outback dam! Time seems to slow and stretch as the seconds tick agonisingly by. Will the fish eat, or will it spook away in alarm at the last moment? For better or worse, once you’ve tasted the sheer delights of sight fishing, “blind casting”, “prospecting” or “flogging the water” will always be a distant second best. THREE KEYS TO SUCCESS NOTE: To read the rest of this blog, you must be a member of “Starlo’s Inner Circle” of Fishotopia.com. To discover all the benefits of belonging and find out how to sign up, simply click...

In this fourth part of my ongoing blog series about our new Beastmaster Boats Snubby 500 rig, I reveal the “vital statistics” of the boat and share a few recent images of it in action. If you’d like to read Part 1, click here. For Part 2, click here. And for Part 3, click here. Also, don’t forget that you can watch a short video of the boat’s maiden voyage right here. Okay, down to business!   VITAL STATISTICS: BEASTMASTER SNUBBY 500* LENGTH: 5.0 metres (16′ 6″) BEAM: 1.98 metres (6′ 6″) HULL DEPTH: 0.76 metres (2′ 6″) HULL SIDES: 0.57 metres (1′ 11″) DRAFT: 0.26 metres (10″) DRY HULL WEIGHT: approx. 375 kilos (827 lb) * Explanatory Notes: Measurements quoted are generally to within a few millimetres and all conversions to imperial have been rounded up or down to nearest inch or pound. Hull Depth refers to the maximum depth from gunwale tops/coamings to the deepest part of hull. Hull Sides are flat sides from coamings to chines. Draft (vertical distance between the waterline and deepest part of keel) is an approximate figure (+/- 10%) for the unladen hull and will depend on weight added, load distribution, salinity of water, etc. For this reason, the draft shown should be regarded as a minimum under ideal conditions. Dry Hull Weight is an approximate figure (+/- 10%) and obviously does not include motor, batteries, fuel, electronics, safety gear and other equipment. Next time we’ll have a look at the Yamaha F70A four-stroke outboard fitted to the Snubby, along with the MotorGuide Xi5 bow-mounted electric trolling motor, Lowrance electronics and various other fittings. Until then, tight lines… and meanwhile, here are a few more images of the rig in action:   For more, follow me on...

My good mate Paul Kneller first began making lures professionally a quarter of a century ago, in the early 1990s, under the banner of Deception Lures. He quickly carved a loyal market niche for these beautiful, hand-crafted timber hard bodies. Deception Shrimps, in particular, became the “go-to” lure at places like Lake Windamere, in central western NSW, while his Nippers, Cherax, Yabbies, Palaemons and other models also developed a strong following amongst both fresh and saltwater anglers. The Deception brand was eventually sold to the Brisbane-based Tacspo company around 2004, when Paul and his wife Cheryl opened a tackle shop in Maclean, in far northern NSW. Following this change-over, Paul’s original Deceptions quickly became collector’s items, attracting high prices on the boutique secondhand market. I’m pleased to announce that after a long lay off from making and designing lures, Paul is back with renewed vigour and passion, keen to take his lures to the next level in terms of detail, action and quality. The models shown here are just an entree, with many more lures to be added to the line-up over the coming months and years. Best of all, every Kneller lure is crafted from wood, and Paul insists that this will never change! Here’s a very quick rundown of some of the gems in Kneller’s new range. You can find out more by visiting his page on Facebook here, going directly to his on-line shop here, or emailing Paul at: shake.bake@bigpond.com CHERNOBYL SHAD 55FD The Chernobyl Shad 55FD is a 55mm fat-bodied lure that could be best described as an all-rounder; suited to bass, bigger bream, flathead, estuary perch, trout, sooties and so on. The Chernobyl Shad will dive to around 3 metres on the troll or off a long cast, with...

In this second installment of the Snubby Boat Files, we finally get our new Beastmaster Snubby 500 boat wet. You can watch our short video of the event here, or by simply clicking the play button below: Even a grey, overcast and cool day couldn’t dampen our enthusiasm for giving “Mad Keen” (yes, she’s been officially named!) her first on-water run. Launching was a breeze and everything worked exactly as it should. We puttered slowly up through the 8-knot zone, then gradually increased the power… With the brand-spanking new F70A Yamaha still very much in run-in mode, we needed to frequently vary the revs and only touch full noise very briefly, but we were extremely impressed by the rig’s initial performance. It seems the motor height and prop choice (a Yamaha SS [stainless steel] Talon SDS 14K 13 1/8) were spot on… which is always a huge relief! (Find out more about those amazing Talon SDS props here.) Please note that the preliminary performance figures shown below are with a motor that’s still very new and therefore a tad tight. Also, there was very little additional gear in the boat, apart from basic safety equipment, 10 litres of fuel and two people. Here are the initial speeds we observed (via the GPS) at various revs: INITIAL PERFORMANCE FIGURES 3500 RPM = 15 knots (28 km/h) 4000 RPM = 20 knots (37 km/h) 5000 RPM = 25 knots (46 km/h) 6000RPM = 29 knots (54 km/h) 6100 RPM = 30 knots (55.5 km/h)* * Wide open throttle I’m particularly impressed by being able to sit on 20 knots or a whisker over (around 40 km/h) at 4000 to 4200 RPM, as this is an extremely economical mode of operation. I’d expect to be covering close...

In this first installment of my ongoing blog series about our Beastmaster Snubby 500, I look at the decision-making process that went into our selection of this bespoke, custom-built boat: Choosing a boat is always a massive decision. Like most keen anglers who’ve been pursuing their passion for a considerable period of time, I’ve owned a bunch of different vessels. I kicked off with a second-hand fibreglass canoe in my teens, went on to a car-topper aluminium punt, then a Webster Twinfisher alloy cat. That brings us through to an era when I first met shipwright and boat builder, Tyson Dethridge, and fell head over heels for his customised Full Boar fibreglass sportfishers, running first a 5 metre version, then a 5.5. Next, I spent a year or two in a fully imported Scout flats boat from the U.S. That was followed by a neat little 4.1 metre tiller-steer Cross Country (again built by Tyson) before I graduated into one of his larger, centre-console 4.75 metre Cross Country rigs. That 4.75 Cross Country (called “Evil Minnow” after one of the deadliest Squidgies soft plastic colours) was part of our family for well over six years, and we absolutely loved it. I’d have to say it was my favourite boat up until that point. With its light-but-strong foam-core sandwich fibreglass construction and powered by a class-leading F70A Yamaha 4-stroke motor, this was quite a radical craft, especially in Darwin, where we lived at the time. I reckon it opened a few alloy-blinkered Top End eyes to the validity and surprising durability of good glass. Our 4.75 Cross Country was the prototype of that hull and it had a few “rough edges” internally, but it served us exceptionally well. We dragged it over some bloody awful...

For at least a decade now, kayak fishing has been one of the fastest growing sectors of the angling scene here in Australia, as well as in many other parts of the world. Interestingly, this phenomenon shows little sign of slowing. Sales of kayaks and related paraphernalia continue to boom, marking this as one of the strongest niches in the marine and boating industry. I must admit that I’ve been a little slow to embrace the whole kayak “thing”. I spent lots of time sitting (usually with a wet bum) in various Canadian-style canoes throughout my early fishing career, and I was delighted when I could finally afford to graduate to a “real” boat. Don’t get me wrong: canoes have their place, and I’ve enjoyed some wonderful times in them. However, once you’ve fished from a craft that’s sufficiently large and stable to stand up in, especially one with a raised casting deck, it’s very hard to willingly go back to the low, cramped, unstable and often wet confines of a canoe. There were also other factors holding me back from kayak fishing. One was a perception that many ’yak fishers, as well as those who catered to their equipment needs, seemed to be missing the whole point of simple, minimalist boating. Some of the ’yak rigs I saw on the water and in magazines or videos had more “fruit” hanging off them in the way of electronics and accessories than my 4.8 metre trailer boat! Some actually required dedicated trailers of their own just to get them to the water’s edge, and half an hour or more of fiddling, tweaking and setting up before they were good to go. Wasn’t portability and ease of use supposed to be the whole point of ’yakking?...

For those who missed it. I’ve attached my recent feature on catching big bream on flies from “Barra, Bass & Bream Digest” magazine. And in case the text from the magazine layouts is too small to read on your screen or in this format, I’ve also included the straight text at the bottom of this blog post. Also, if you’d like to find out how to purchase or subscribe to “Barra, Bass & Bream” on-line, go to: http://www.nafa.com.au/ Big Bream On Fly The Ultimate Challenge? What’s the ultimate prize in modern day barra, bass and bream fishing? Catching a metre-plus ’mundi on a surface lure and light tackle? Landing a 60 cm wild bass from a kayak? Pulling a 2 kg bream onto a wave-washed rock ledge in the middle of the night? Starlo rates all of those milestones, but reckons there’s another one that presents even more of a challenge. In his opinion, mastering big bream on fly is the toughest (and perhaps the most rewarding) game in town… Read on and see if you agree! The average, weekend angler no doubt struggles to understand why some of us might actually choose to make our fishing any harder than it needs to be. For many hopefuls, simply catching a feed of fish is a daunting enough prospect, without deliberately adding extra layers of difficulty to the process. Yet, as with any endeavour, those who are seriously engrossed in their passion and spend a lot of time pursuing it eventually look for extra layers of challenge: new peaks to scale and higher marks to attain. In preparing to write this feature, I spent considerable time pondering the bigger challenges fishing has presented me with over the years. In my late teens and early 20s,...

Saturday, 21st July, 2012 saw the staging of the second annual Barra, Bass and Bream Digest Harbourmasters’ Invitational on the waters of Darwin Harbour. In stark contrast to last year’s event, a cool, windy dawn greeted the 41 keen competitors who made up 21 teams taking part in this year’s BBBDHI, and the stiff sou’ easter continued to build throughout the morning, peaking at close to 30 knots before subsiding a little in the early afternoon. The aim of this unique one-day tournament is straightforward enough: go out and catch as many barra and bream as you possibly can on cast-and-retrieved lures or flies (trolling, bait fishing and berleying are not allowed). However, where it gets really interesting — and very different to any other Top End fishing competition — is in the final scoring process. Only the combined lengths of the longest barra and the longest bream taken by each team actually count towards their final points’ tally. And, critically, one species doesn’t rate without the other. In other words, you could theoretically land a metre-long barramundi (a monster by Darwin Harbour standards), yet still score zero points, simply because you’d failed to catch and record a bream! Unique concept My wife (and fellow writer/presenter) Jo and I devised this unusual event in an effort to effectively force Top End anglers into thinking a little more seriously about the vast schools of bream that frequent our waters, especially during the cooler months of the Dry Season. In the past, most Top End fishos have been quite dismissive about bream and bream fishing. Yet, with my southern background and years of competing on the bream tournament circuit, I know just how challenging these little buggers can be to catch! I wanted a way of sharing that challenge...

Over the course of a year, I get to talk to a lot of soft plastics fishers from around the country. Some I meet at seminars and shows. Others I chat with via the various pages on Facebook that I run or help to administer (especially the StarloFishing, Fishingscool and Squidgy Soft Plastics pages), or through my blogs here at www.starlofishing.me Still others send their letters or emails to me via the magazines I write for. However, no matter what the source of the enquiry, one question (or variations of it) dominates the calls for advice that I receive. Typically, that query begins with the words: “What’s the best soft plastic for…?” The rest of that sentence almost always contains a species of fish and a precise location: What’s the best soft plastic for bream in the Patterson Lakes? What’s the best soft plastic for trout in the Murrumbidgee River? What’s the best soft plastic for flathead on the Gold Coast? What’s the best soft plastic for yellowbelly in the Murray? What’s the best soft plastic for redfin in Lake Eildon? What’s the best for barra in the Daly? And so on… I can’t help but smile at the geographic specificity of these well-meaning questions. Anglers clearly have their favourite fishing spots and they seem to expect that the fish they chase in these beloved haunts will behave just a little differently to those living down the road, around the bend or across the border. Generally speaking, this is not the case. I’ve caught redfin perch in the New England rivers of north western NSW, and also in the very “old England” rivers around the historical university city of Cambridge, in Great Britain (where they’re simply known as perch). Rather unsurprisingly, these fish looked...