On 15 January, 2019, I received some very exciting news from NSW DPI Fisheries. It seems that a large dusky flathead I tagged and fin-clipped for DNA analysis on 16th October, 2018 had recently been recaptured and re-released. The fish measured 84.5 cm when I caught it in mid-October, in the lower reaches of Tuross Lake. On 4th January, 2019, when recaptured by Ian “Hoots” Cowie, it had grown to 86.5 cm (that’s 2 cm of growth in just 80 days!) and had moved at least two nautical miles (close to 4km) up the Tuross River. It was also in excellent condition at the time of recapture and had clearly put on weight. The fish swum away very strongly when released the second time. (As an interesting side note, Ian reports that there was quite a bit of weed growth on the tag that had to be scraped off to reveal the serial number.) Interestingly, this fish was hooked quite deeply when I caught it on a big, un-weighted soft plastic, requiring the use of long-nosed pliers to remove the hooks, and it did bleed slightly. It was then held in the circulating live-well aboard my boat for approximately 20 minutes and transported several hundred metres to the boat ramp so that I could meet my wife Jo and John Suthern from the Tuross Heads Fishing Club, who had the fin-clip sampling kit. None of those original handling parameters were optimal or ideal, yet the fish not only survived, but clearly thrived. For me, this is EXCELLENT news and bodes very well for the survival of large flathead that can be quickly unhooked and released with minimal handling at or near the capture sight, as recommended. (For details on how to best handle flathead...

For at least a decade now, kayak fishing has been one of the fastest growing sectors of the angling scene here in Australia, as well as in many other parts of the world. Interestingly, this phenomenon shows little sign of slowing. Sales of kayaks and related paraphernalia continue to boom, marking this as one of the strongest niches in the marine and boating industry. I must admit that I’ve been a little slow to embrace the whole kayak “thing”. I spent lots of time sitting (usually with a wet bum) in various Canadian-style canoes throughout my early fishing career, and I was delighted when I could finally afford to graduate to a “real” boat. Don’t get me wrong: canoes have their place, and I’ve enjoyed some wonderful times in them. However, once you’ve fished from a craft that’s sufficiently large and stable to stand up in, especially one with a raised casting deck, it’s very hard to willingly go back to the low, cramped, unstable and often wet confines of a canoe. There were also other factors holding me back from kayak fishing. One was a perception that many ’yak fishers, as well as those who catered to their equipment needs, seemed to be missing the whole point of simple, minimalist boating. Some of the ’yak rigs I saw on the water and in magazines or videos had more “fruit” hanging off them in the way of electronics and accessories than my 4.8 metre trailer boat! Some actually required dedicated trailers of their own just to get them to the water’s edge, and half an hour or more of fiddling, tweaking and setting up before they were good to go. Wasn’t portability and ease of use supposed to be the whole point of ’yakking?...

Bait versus lure? Which is best? Here are a few nifty graphics from a piece on that subject I prepared for www.fix.com.  If you’d like to read the full story, simply click here. Source:...

Lots of anglers still struggle to crack the bream-on-lures code. Truth is, these fish are no pushover. But if you follow my simple, five-point plan below, and watch the accompanying video clip here, I’m confident you’ll be posing for a photo with your first bream on a soft plastic very soon! As I travel the country fishing, researching stories and gathering material for this blog and the many publications I contribute to, I come across increasing numbers of anglers who’ve embraced lure fishing and, in particular, the use of soft plastic lures. The uptake of soft plastics has definitely been one of the most significant trends in Australian recreational angling over the past 10 to 15 years, and its popularity shows no sign of diminishing any time soon. Softies are great lures and they’re not all that hard to use. Most new chums start catching at least the odd fish very early in their plastic-flicking careers. But some species are tougher nuts to crack than others, and the humble bream is perhaps the trickiest of the lot. It’s also the one I get asked about the most. The question typically begins with a statement along the lines of: “I can catch plenty of flathead on plastics, but I’m damned if I can work these bream out!” If you’re in that camp, I’m here to help! Below I’ve listed a simple, five-step strategy for cracking the bream-on-plastics code, and this is accompanied by this short, no-nonsense how-to video clip on my “Starlo Gets Reel” YouTube channel. You can go straight to that video by scanning the QR code at the bottom of this page, or by typing this URL into your browser: www.youtube.com/watch?v=8wuLI5-M3UQ Okay… Are you ready to learn how to catch your very first...

By now, quite a few anglers have become aware of a new player on the fishing line market called GLISS, or GLISS KG, manufactured by German company WFT (World Fishing Tackle). Some are touting this stuff as the potential replacement for existing braided and fused gel-spun polyethylene fishing lines, others as a cross-over between braided lines and monofilament… while still others are panning it as an abject fail… So, what’s the real story? I first became aware of GLISS after reading this article on the Angling International website during 2014. Since then, Angling International have run several more pieces/press releases about the line, including this one (followed shortly thereafter by this clarification), then this piece earlier in 2015, and most recently, this report about GLISS KG winning the award for best new braided line at the 2015 EFTTEX Show in Europe. (Click on the highlighted links in the previous sentence to read each of the write-ups, or find out more about EFTTEX.) According to these reports and other research I’ve done, GLISS is made from extruded and fused HMPE ( high modulus polyethylene) fibres. HMPE is widely used in high quality marine ropes, tow lines, etc. In a fishing context, it’s claimed to have very low stretch (like braid), to be ultra smooth (like mono), and to have ridiculously thin diametres for its strength… Reading those descriptions, I just had to get hold of some and try it, as it sounded perfect for a lot of the styles of “finesse” fishing I do… Tracking down some WFT GLISS wasn’t easy. Eventually, I ordered a spool of 6kg in the translucent finish on-line from a British mail order business (6 kg was the lightest they had in stock). After waiting several weeks for the line...

The “Lure of Trout” live-in workshop that Jo and I ran at Lake Crackenback Resort & Spa in the Australian Snowy Mountains during early November, 2014 was a great success and seems to have been enjoyed enormously by all participants. Watch the short video below for a taste of the workshop’s highlights. We’re planning more of these residential workshops for 2015 and beyond, so if you’d like to be involved, lodge an obligation-free expression of interest by clicking here. You should also check out our other hosted trips to exciting destinations by clicking here....

For those who missed it. I’ve attached my recent feature on catching big bream on flies from “Barra, Bass & Bream Digest” magazine. And in case the text from the magazine layouts is too small to read on your screen or in this format, I’ve also included the straight text at the bottom of this blog post. Also, if you’d like to find out how to purchase or subscribe to “Barra, Bass & Bream” on-line, go to: http://www.nafa.com.au/ Big Bream On Fly The Ultimate Challenge? What’s the ultimate prize in modern day barra, bass and bream fishing? Catching a metre-plus ’mundi on a surface lure and light tackle? Landing a 60 cm wild bass from a kayak? Pulling a 2 kg bream onto a wave-washed rock ledge in the middle of the night? Starlo rates all of those milestones, but reckons there’s another one that presents even more of a challenge. In his opinion, mastering big bream on fly is the toughest (and perhaps the most rewarding) game in town… Read on and see if you agree! The average, weekend angler no doubt struggles to understand why some of us might actually choose to make our fishing any harder than it needs to be. For many hopefuls, simply catching a feed of fish is a daunting enough prospect, without deliberately adding extra layers of difficulty to the process. Yet, as with any endeavour, those who are seriously engrossed in their passion and spend a lot of time pursuing it eventually look for extra layers of challenge: new peaks to scale and higher marks to attain. In preparing to write this feature, I spent considerable time pondering the bigger challenges fishing has presented me with over the years. In my late teens and early 20s,...

It’s not every day that you get to launch a comprehensive range of hard-bodied lures and semi-soft topwaters onto the Australian market, knowing that each lure will retail for $10 or less, yet still be an excellent fish catcher, with a classy finish and better-than-average hardware. However, that’s what I’m happy to say I’ve been able to do with my new STARLO PRO Lures range, designed and selected by me exclusively for the BCF chain of stores here in Australia. Now, I realise from past comments here and elsewhere that not every Aussie angler is necessarily a huge fan of BCF. There’s no doubt that the big chains (including BCF) have led to the demise of some small independent tackle stores, just as the competition from Coles and Woolworths has resulted in a reduction in numbers of local grocery outlets, butcher shops and so on. Nonetheless, for better or worse, I suspect there’s a certain inevitability to this sort of evolution in the world of retail. It’s also true that the better independents (in all fields, including fishing tackle) will not only survive but thrive in the face of such competition. They achieve this by providing the sort of expert advice, individualised customer service and “value adding” that most chains simply can’t or won’t offer. Meanwhile, BCF and their ilk do provide an excellent service to a great many customers, employ a heap of Aussie workers in the process, and don’t, in my experience, indulge in the sort of “crazy, crazy, crazy!” unsustainable discounting that could damage the industry. So, I’m more than happy to be involved with sourcing and designing exclusive lines of tackle for them, just as I have on occasion for other companies.         Anyway, if you’d like...

In the first part of this blog series on spooling up your reel, I looked at attaching the end of your line to the spool of your reel before beginning to crank all that line on… Now it’s time to work up a sweat as we finish the job! Hopefully, you’ll remember that in that first part I instructed you to fit the reel to a rod, run the end of the new line down through at least one runner, wrap it several times around the spool core, then secure it firmly in place with a five or six turn Uni Knot. I also stressed that if you’re filling a spinning (threadline) reel, you’ll need to open the bail arm first, before attaching the line, while if it was a baitcaster, the line would need to pass through the level wind carrier first. After tying that important Uni Knot, tightening it firmly and trimming the knot to leave a one or two centimetre tag, you can actually begin spooling up… This is the physically active part of the process! (Note that if you’re spooling with braided or fused gel-spun polyethylene line, lots of people suggest laying down a base of 15 or 20 metres of mono first and tying your braid to this. To be honest, I don’t usually do this, but it’s not a bad idea.) TO READ THIS REST OF THIS BLOG SERIES, GO TO “STARLO’S INNER CIRCLE”, BY CLICKING...

Check out this great clip produced by the guys at “The Offroad Adventure Show”! [youtube=http://www.youtube.com/watch?v=uBrTANhJZMQ&w=420&h=315]  

Most modern fishing reels, regardless of their style or type, are equipped with a drag or “slipping clutch” mechanism of some sort that allows line to be pulled from the reel’s spool under a pre-set tension. On a threadline or spinning reel, drag pressure is usually adjusted via a knob located on the front of the spool or (more rarely) under the rear of the reel’s body. Overheads and baitcasters either have a star wheel under the handle or a lever on the side of the reel for adjusting the drag, while sidecasts and centrepins typically feature a nut or star in the centre of the spool. This drag is intended to prevent the line from breaking should excessive force be placed upon it. Instead of snapping, line slips from the spool against the pre-set drag tension. When a large or powerful fish is hooked, it usually needs to be “played” using a combination of drag resistance and rod work. The term “playing a fish” means taking your time and bringing the fish in more slowly and smoothly while using the flex of the rod as a shock absorber. If necessary, you will also need to allow the hooked fish to “run”: in other words, to pull line from the spool against the reel’s pre-set drag or slipping clutch. This may happen many times during a fight with a strong adversary, especially on lighter line. A big, strong fish can easily pull the rod tip down and rip line off the spool against the resistance of the reel’s drag. However, if the drag has been set too tightly, the line can possibly snap, or the hook might bend or straighten and rip out of the fish’s mouth. On the other hand, if the drag...

For those who missed it first time around in print, here’s a piece on open water bream luring that first ran in FishLife magazine earlier this year: The art of luring bream has been one of the major engines of change in Australian sport fishing over the past few decades. In less than a single generation, catching bream on lures has gone from being an accident or a novelty for most anglers to a regular pursuit for many. Even those who don’t “get it” and wonder what all the fuss is about must grudgingly admit that the pursuit of bream on artificial baits has completely transformed our sport. Before many of you reading these words were born, that doyen of Australian fishing writing, Vic McCristal, offered the opinion that anglers skilled enough to regularly take bream on lures would tend to find most other species easy. It was McSea’s quietly understated way of doffing his cap to the bream clan as perhaps our most challenging piscatorial targets. What Vic could hardly have guessed in those days was the passion with which this country’s sport fishing community would eventually embrace that particular challenge, and how doing so would completely revolutionise our tackle, our techniques and even our angling mindset. Make no mistake: bream luring has radically altered the shape of Australian fishing, and this significant evolutionary upheaval is far from having run its course. Discoveries remain to be made. For many, open water breaming is just one of them. Middle Of Nowhere For most of us, thoughts of catching bream on lures immediately conjure mental images of structure fishing: accurately casting our soft plastics and little hard bodies at shorelines, rocks, snags, pylons, oyster lease racks or moored boats. But what if I told you...

Over the course of a year, I get to talk to a lot of soft plastics fishers from around the country. Some I meet at seminars and shows. Others I chat with via the various pages on Facebook that I run or help to administer (especially the StarloFishing, Fishingscool and Squidgy Soft Plastics pages), or through my blogs here at www.starlofishing.me Still others send their letters or emails to me via the magazines I write for. However, no matter what the source of the enquiry, one question (or variations of it) dominates the calls for advice that I receive. Typically, that query begins with the words: “What’s the best soft plastic for…?” The rest of that sentence almost always contains a species of fish and a precise location: What’s the best soft plastic for bream in the Patterson Lakes? What’s the best soft plastic for trout in the Murrumbidgee River? What’s the best soft plastic for flathead on the Gold Coast? What’s the best soft plastic for yellowbelly in the Murray? What’s the best soft plastic for redfin in Lake Eildon? What’s the best for barra in the Daly? And so on… I can’t help but smile at the geographic specificity of these well-meaning questions. Anglers clearly have their favourite fishing spots and they seem to expect that the fish they chase in these beloved haunts will behave just a little differently to those living down the road, around the bend or across the border. Generally speaking, this is not the case. I’ve caught redfin perch in the New England rivers of north western NSW, and also in the very “old England” rivers around the historical university city of Cambridge, in Great Britain (where they’re simply known as perch). Rather unsurprisingly, these fish looked...

In my last two blogs in this series I’ve been exploring the exciting subject of customizing your soft plastic lures to alter their actions, colours and sink rates in order to better suit specific applications, fishing scenarios and target species. As I explained in both of those blogs, this entire subject area of customizing plastics is a branch of tackle tinkering that far too few Aussie anglers appear willing to experiment with. Many seem to believe that these lures must be used in exactly the form supplied for sale by the manufacturer. But as we’ve been discovering, that’s not the case at all! In fact, nothing could be further from the truth. Unlike most hard-bodied offerings, softies lend themselves extremely well to individual input and fine tuning from the angler, allowing you to clearly stamp your own personal identity and fishing preferences on the lures you use. In the first blog on Customising Soft Plastics, I focused on tweaking colours and patterns using various dyes and marker pens to achieve specific results, whether attempting to “match the hatch”, suit the environment, stand out from the pack or simply emulate a successful hard-bodied lure finish. Last time around, in Part 2, we pulled out the scissors, razor blades and hobby knives and started playing with the actual shape, bulk and profile of these versatile lures to adjust their actions, overall sizes and sink rates. This time, I want to look at the intriguing subject of lure hardness and its impact on action, “mouth feel” and durability. So, let’s kick off by tackling the subject of relative hardness in soft lure materials: TO READ THE REST OF THIS BLOG & OTHERS IN THE SERIES, CLICK...

It’s time to continues our look at customising your soft plastic lures with an examination of easy ways in which the size, profile, sink rates and actions of these great lures can be tweaked and manipulated via some simple cutting and shaping: In my last blog about customising soft plastics I explained that this is an avenue of tackle tinkering that too few anglers seem willing to explore. Many seem to assume that these lures must be used in exactly the form they were originally purchased in. Trust me, that’s certainly not the case! I theorized that this hands-off approach to tweaking plastics is most likely a hangover from our hard-bodied luring days. Beyond possibly upgrading some hooks and rings, very few anglers significantly modify their hard lures. But soft plastics are much easier to customise than hard lures, and doing so can produce some surprising results. The big secret is not to be afraid to give it a go! Last time round I focused on “blinging” your plastics by using various dyes and marker pens to alter or enhance their colours and patterns. This time I want to take customising one step further and actually get into playing with the shapes, sizes, profiles, sink rates and actions of our soft plastics. To do this, all you really need is a sense of adventure and a pair of sharp scissors. Making that first step of actually taking the scissors or craft blade to your plastic tails is perhaps the biggest leap of faith required to get into customizing soft plastics. After that, it gets much easier. TO READ THIS BLOG IN FULL & ACCESS OTHERS IN THE SERIES, GO TO “STARLO’S INNER CIRCLE” BY CLICKING...