Bait versus lure? Which is best? Here are a few nifty graphics from a piece on that subject I prepared for www.fix.com.  If you’d like to read the full story, simply click here. Source:...

The third and final round of the hard-fought Australian Freshwater Masters tournament series was staged in mid-February this year on the waters of Lake Mulwala, a picturesque impoundment straddling the NSW/Victorian border, an hour or so west of Albury. This unique, three-stage challenge targets a trio of iconic Australian native species at three very different venues. The first round of the latest Freshwater Masters took place last November on Lake Windamere, near the NSW regional town of Mudgee, and was devoted to the pursuit of golden perch or yellowbelly. A few days later, round two was staged on Glenbawn Dam, in the Hunter Valley, with Australian bass as the nominated target species. Finally, almost three months later, competitors gathered at Lake Mulwala to hunt the elusive Murray cod. A catch-and-release series devoted entirely to lure and fly fishing, The Australian Freshwater Masters challenges its field of two-person teams to measure, photograph and release up to 10 legal specimens of each target species at each arena over the course of two days’ of intensive fishing. Cumulative point scores (one point per millimeter) carry forward from round to round, ultimately deciding the outcome of the event. This year, the eventual winners were Team Starlo’s Squidgies, consisting of high profile fishing communicator, Steve ‘Starlo’ Starling, and his wife Jo. Consistent performances in rounds two and three allowed Starlo and Jo to hold onto the significant lead they’d amassed on Windamere’s goldens in round one (where Jo was also the individual champion angler), finally giving them an 800 point break over the second-placed Jigheads Team of Mitchell Skeers and Brad Gardiner. A further 1,300 points behind in third place was Team Windybanks, made up of Simon McAlpine and David Dobson. Overall Champion Angler for the Masters was Mitchell...

Lots of anglers still struggle to crack the bream-on-lures code. Truth is, these fish are no pushover. But if you follow my simple, five-point plan below, and watch the accompanying video clip here, I’m confident you’ll be posing for a photo with your first bream on a soft plastic very soon! As I travel the country fishing, researching stories and gathering material for this blog and the many publications I contribute to, I come across increasing numbers of anglers who’ve embraced lure fishing and, in particular, the use of soft plastic lures. The uptake of soft plastics has definitely been one of the most significant trends in Australian recreational angling over the past 10 to 15 years, and its popularity shows no sign of diminishing any time soon. Softies are great lures and they’re not all that hard to use. Most new chums start catching at least the odd fish very early in their plastic-flicking careers. But some species are tougher nuts to crack than others, and the humble bream is perhaps the trickiest of the lot. It’s also the one I get asked about the most. The question typically begins with a statement along the lines of: “I can catch plenty of flathead on plastics, but I’m damned if I can work these bream out!” If you’re in that camp, I’m here to help! Below I’ve listed a simple, five-step strategy for cracking the bream-on-plastics code, and this is accompanied by this short, no-nonsense how-to video clip on my “Starlo Gets Reel” YouTube channel. You can go straight to that video by scanning the QR code at the bottom of this page, or by typing this URL into your browser: www.youtube.com/watch?v=8wuLI5-M3UQ Okay… Are you ready to learn how to catch your very first...

For those who missed it. I’ve attached my recent feature on catching big bream on flies from “Barra, Bass & Bream Digest” magazine. And in case the text from the magazine layouts is too small to read on your screen or in this format, I’ve also included the straight text at the bottom of this blog post. Also, if you’d like to find out how to purchase or subscribe to “Barra, Bass & Bream” on-line, go to: http://www.nafa.com.au/ Big Bream On Fly The Ultimate Challenge? What’s the ultimate prize in modern day barra, bass and bream fishing? Catching a metre-plus ’mundi on a surface lure and light tackle? Landing a 60 cm wild bass from a kayak? Pulling a 2 kg bream onto a wave-washed rock ledge in the middle of the night? Starlo rates all of those milestones, but reckons there’s another one that presents even more of a challenge. In his opinion, mastering big bream on fly is the toughest (and perhaps the most rewarding) game in town… Read on and see if you agree! The average, weekend angler no doubt struggles to understand why some of us might actually choose to make our fishing any harder than it needs to be. For many hopefuls, simply catching a feed of fish is a daunting enough prospect, without deliberately adding extra layers of difficulty to the process. Yet, as with any endeavour, those who are seriously engrossed in their passion and spend a lot of time pursuing it eventually look for extra layers of challenge: new peaks to scale and higher marks to attain. In preparing to write this feature, I spent considerable time pondering the bigger challenges fishing has presented me with over the years. In my late teens and early 20s,...

Check out this great clip produced by the guys at “The Offroad Adventure Show”! [youtube=http://www.youtube.com/watch?v=uBrTANhJZMQ&w=420&h=315]  

Most modern fishing reels, regardless of their style or type, are equipped with a drag or “slipping clutch” mechanism of some sort that allows line to be pulled from the reel’s spool under a pre-set tension. On a threadline or spinning reel, drag pressure is usually adjusted via a knob located on the front of the spool or (more rarely) under the rear of the reel’s body. Overheads and baitcasters either have a star wheel under the handle or a lever on the side of the reel for adjusting the drag, while sidecasts and centrepins typically feature a nut or star in the centre of the spool. This drag is intended to prevent the line from breaking should excessive force be placed upon it. Instead of snapping, line slips from the spool against the pre-set drag tension. When a large or powerful fish is hooked, it usually needs to be “played” using a combination of drag resistance and rod work. The term “playing a fish” means taking your time and bringing the fish in more slowly and smoothly while using the flex of the rod as a shock absorber. If necessary, you will also need to allow the hooked fish to “run”: in other words, to pull line from the spool against the reel’s pre-set drag or slipping clutch. This may happen many times during a fight with a strong adversary, especially on lighter line. A big, strong fish can easily pull the rod tip down and rip line off the spool against the resistance of the reel’s drag. However, if the drag has been set too tightly, the line can possibly snap, or the hook might bend or straighten and rip out of the fish’s mouth. On the other hand, if the drag...

For those who missed it first time around in print, here’s a piece on open water bream luring that first ran in FishLife magazine earlier this year: The art of luring bream has been one of the major engines of change in Australian sport fishing over the past few decades. In less than a single generation, catching bream on lures has gone from being an accident or a novelty for most anglers to a regular pursuit for many. Even those who don’t “get it” and wonder what all the fuss is about must grudgingly admit that the pursuit of bream on artificial baits has completely transformed our sport. Before many of you reading these words were born, that doyen of Australian fishing writing, Vic McCristal, offered the opinion that anglers skilled enough to regularly take bream on lures would tend to find most other species easy. It was McSea’s quietly understated way of doffing his cap to the bream clan as perhaps our most challenging piscatorial targets. What Vic could hardly have guessed in those days was the passion with which this country’s sport fishing community would eventually embrace that particular challenge, and how doing so would completely revolutionise our tackle, our techniques and even our angling mindset. Make no mistake: bream luring has radically altered the shape of Australian fishing, and this significant evolutionary upheaval is far from having run its course. Discoveries remain to be made. For many, open water breaming is just one of them. Middle Of Nowhere For most of us, thoughts of catching bream on lures immediately conjure mental images of structure fishing: accurately casting our soft plastics and little hard bodies at shorelines, rocks, snags, pylons, oyster lease racks or moored boats. But what if I told you...

In mid-September, 2012, my wife Jo and I were lucky enough to sample the extraordinary fishing on offer around the remote Cobourg Peninsula, north east of Darwin, as guests of a wonderful operation called Venture North Australia. Owned and run by affable brothers Aaron and Hugh Gange, Venture North has historically been an eco-tourism, wildlife and cultural-experience guiding operation offering a little casual fishing on the side (usually aimed at catching dinner). However, earlier in 2012, all that changed with their purchase of a Darwin-built, 7-metre CustomWorks Eliminator plate alloy sportfishing boat powered by a 225 HP Yamaha four-stroke. To say the boys have made a decision to take the fishing side of their business a lot more seriously would be something of an understatement! Interestingly, my good lady Jo was partly instrumental in this significant upgrading of Venture North’s fishing focus. While looking at the Gange brothers’ website in her role as a marketing consultant, Jo noticed quite a few photos of big fish. She asked why they didn’t place more prominence on this aspect of their operation, and her comments obviously got the guys thinking! Less than a year later they’d bitten the bullet, bought the big boat and significantly ramped up the angling side of the business. As something of a thank-you to Jo for her advice, Aaron and Hugh invited her up to Cobourg for a few days, and mentioned that she might as well bring her old man along, as apparently he didn’t mind a spot of fishing, either! Back to Cobourg As our light plane banked in over the broad, sparkling expanse of Cobourg’s Port Essington, I reflected that it had been at least 25 years since my last visit to this fantastic part of the world… Far...

Over the course of a year, I get to talk to a lot of soft plastics fishers from around the country. Some I meet at seminars and shows. Others I chat with via the various pages on Facebook that I run or help to administer (especially the StarloFishing, Fishingscool and Squidgy Soft Plastics pages), or through my blogs here at www.starlofishing.me Still others send their letters or emails to me via the magazines I write for. However, no matter what the source of the enquiry, one question (or variations of it) dominates the calls for advice that I receive. Typically, that query begins with the words: “What’s the best soft plastic for…?” The rest of that sentence almost always contains a species of fish and a precise location: What’s the best soft plastic for bream in the Patterson Lakes? What’s the best soft plastic for trout in the Murrumbidgee River? What’s the best soft plastic for flathead on the Gold Coast? What’s the best soft plastic for yellowbelly in the Murray? What’s the best soft plastic for redfin in Lake Eildon? What’s the best for barra in the Daly? And so on… I can’t help but smile at the geographic specificity of these well-meaning questions. Anglers clearly have their favourite fishing spots and they seem to expect that the fish they chase in these beloved haunts will behave just a little differently to those living down the road, around the bend or across the border. Generally speaking, this is not the case. I’ve caught redfin perch in the New England rivers of north western NSW, and also in the very “old England” rivers around the historical university city of Cambridge, in Great Britain (where they’re simply known as perch). Rather unsurprisingly, these fish looked...

In my last two blogs in this series I’ve been exploring the exciting subject of customizing your soft plastic lures to alter their actions, colours and sink rates in order to better suit specific applications, fishing scenarios and target species. As I explained in both of those blogs, this entire subject area of customizing plastics is a branch of tackle tinkering that far too few Aussie anglers appear willing to experiment with. Many seem to believe that these lures must be used in exactly the form supplied for sale by the manufacturer. But as we’ve been discovering, that’s not the case at all! In fact, nothing could be further from the truth. Unlike most hard-bodied offerings, softies lend themselves extremely well to individual input and fine tuning from the angler, allowing you to clearly stamp your own personal identity and fishing preferences on the lures you use. In the first blog on Customising Soft Plastics, I focused on tweaking colours and patterns using various dyes and marker pens to achieve specific results, whether attempting to “match the hatch”, suit the environment, stand out from the pack or simply emulate a successful hard-bodied lure finish. Last time around, in Part 2, we pulled out the scissors, razor blades and hobby knives and started playing with the actual shape, bulk and profile of these versatile lures to adjust their actions, overall sizes and sink rates. This time, I want to look at the intriguing subject of lure hardness and its impact on action, “mouth feel” and durability. So, let’s kick off by tackling the subject of relative hardness in soft lure materials: TO READ THE REST OF THIS BLOG & OTHERS IN THE SERIES, CLICK...