Below is my editorial from the February 2019 “Fishotopian” newsletter. To subscribe to these free monthly newsletters from Fishotopia.com, please click here. Unless you’ve been overseas or off grid for the past few months, you’ll have seen coverage of catastrophic fish kills in outback NSW, especially along the Darling River near Menindee. The scale of this disaster is staggering and difficult for most of us to comprehend. It appears the loss of aquatic life in some stretches of this iconic outback waterway may be close to total. It’ll take decades for native fish populations to recover, assuming they ever do… and that’s a big assumption. The Darling River holds a special place in my heart. Back in 1980, my first posting as a wet-behind-the-ears schoolteacher was to Bourke, in north western NSW. Here, along the steep banks of the twisting Darling, I discovered the “vision splendid” of Banjo Patterson’s “sunlit plains extended, and at night the wond’rous glory of the everlasting stars”. It was here I first inhaled the intoxicating perfume of that wonderful petrichor that’s released as fat drops of rain smack onto drought-parched plains, and watched the sun slide behind a horizon so staggeringly wide you’d swear you can see the curvature of the earth. On the downside, I also witnessed the mud-sucking peak of a spreading carp plague, and watched the disturbing phenomenon of a river suddenly flowing backwards as giant irrigation pumps fired up to feed cotton crops the size of small European nations. For me, the writing was already on the wall for the mighty Darling, and the story it told was not a happy one. The Darling is officially described as a “dryland river” and is characterised by “extreme climatic variability”. It has been that way since well...

On 15 January, 2019, I received some very exciting news from NSW DPI Fisheries. It seems that a large dusky flathead I tagged and fin-clipped for DNA analysis on 16th October, 2018 had recently been recaptured and re-released. The fish measured 84.5 cm when I caught it in mid-October, in the lower reaches of Tuross Lake. On 4th January, 2019, when recaptured by Ian “Hoots” Cowie, it had grown to 86.5 cm (that’s 2 cm of growth in just 80 days!) and had moved at least two nautical miles (close to 4km) up the Tuross River. It was also in excellent condition at the time of recapture and had clearly put on weight. The fish swum away very strongly when released the second time. (As an interesting side note, Ian reports that there was quite a bit of weed growth on the tag that had to be scraped off to reveal the serial number.) Interestingly, this fish was hooked quite deeply when I caught it on a big, un-weighted soft plastic, requiring the use of long-nosed pliers to remove the hooks, and it did bleed slightly. It was then held in the circulating live-well aboard my boat for approximately 20 minutes and transported several hundred metres to the boat ramp so that I could meet my wife Jo and John Suthern from the Tuross Heads Fishing Club, who had the fin-clip sampling kit. None of those original handling parameters were optimal or ideal, yet the fish not only survived, but clearly thrived. For me, this is EXCELLENT news and bodes very well for the survival of large flathead that can be quickly unhooked and released with minimal handling at or near the capture sight, as recommended. (For details on how to best handle flathead...

Just a few days prior to Christmas, 2018, my daughter Amy and I undertook the iconic Light-To-Light Walk on the far south coast of NSW. This bush and coastal hiking trail extends from Ben Boyd Tower near Red Point, south of Eden, to Green Cape Lighthouse, overlooking Disaster Bay and Wonboyn. The Light-To-Light walk lies within Ben Boyd National Park. It’s listed at being just over 30 km in length and carries a Grade 4 rating (grades run from 1 for the easiest to 5 for the hardest.) Grade 4 is defined thus: “Bushwalking experience recommended. Tracks may be long, rough and very steep. Directional signage may be limited.” Amy and I began our journey by driving a vehicle each to Green Cape Lighthouse, where I left my old HiLux in the car park and loaded my gear into Amy’s car. We then drove the 40-odd kilometres of mixed dirt and sealed roads back to the car park near Boyds Tower, at the southern entrance of Twofold Bay. Both parking areas lie within the National Park and a day visitation fee is payable. This involves self-registering using the envelopes provided at pay stations to deposit the correct amount of cash into a locked metal container, with a tear-off receipt being displayed on your vehicle’s dash. At the time of our visit, the fee was $8 per night, per vehicle. I have no issue with paying this fee, although I wasn’t especially comfortable with the idea of leaving written notification in plain sight that our vehicles would be unattended for several days. To me this seems like an open invitation to thieves! It might actually make more sense to buy a yearly pass, and I’ll be investigating that option in future. ON THE TRACK Hefting...

With the growing interest these days in fly fishing — especially in saltwater — I thought I’d have a close look at one of the more readily available estuarine and inshore species, and one that represents an ideal starting point for a bit of “swoffing”. That fish is the humble flathead. But first, a few thoughts on fly-fishing in general: WHAT IS FLY FISHING? Fly-fishing has a reputation for being a mysterious and difficult art, mostly practiced by crusty, pipe-smoking old toffs in tweed jackets resplendent with leather elbow patches… But the times have indeed changed! These days, fly-fishing has largely been de-mystified, and it’s also no longer solely about catching trout… nor even fishing only in freshwater. The biggest trick to breaking down any remaining misconceptions surrounding fly fishing is to accept that it’s really no more than a specialised form of lure fishing, in which the “lure” is too light or too wind resistant to be cast any serious distance using conventional spinning or baitcaster tackle… Simple as that! Flies are just artificial baits, exactly like any other lure. However, being made from fur, fibres, tinsel and feathers lashed to a hook with thread, they’re virtually weightless. This presents a challenge from the casting perspective. Through the centuries, that challenge has been overcome by incorporating the necessary casting weight into the line instead of the lure. So, a fly line is effectively no more or less than a long, skinny sinker or float! Its weight or mass is used to deliver that lightweight lure to a fish. The best way to throw such a long, skinny casting weight is to swish it back and forth through the air in order to form a travelling loop that can be extended and then unfurled...

On Sunday, 18th June, 2017, I was invited to address a rally in Hobart protesting against a proposed industrial-scale salmon farm at Okehampton Bay, on the island state’s iconic east coast. You can read more about the background to this divisive issue here. Below is a transcript of my speech to the 1,000-plus folks from across the political and social spectrums who attended this powerful demonstration of people power, dubbed “FloatMo” by its organisers: “Unlike the vast majority of you here today, I’m not a Tasmanian. This is not an issue that’s literally in my backyard. Instead, I’m one of those million-plus visitors who come to this beautiful island each year from the mainland and all over the world. “I love my regular visits to Tasmania, whether I’m wading a trout stream or lake edge with a fly rod in my hand, flicking a lure for a wily bream here in the Derwent River or — as I was yesterday — trolling for tuna in the shadow of those awesome cliffs south of Eaglehawk Neck… There’s so much to love about Tasmania! “So, while this might not be my backyard, I do feel very connected to this place, especially after dozens of visits across several decades. And I feel that I’m qualified to tell you a little bit about what it is that brings people like myself to this island state to spend our tourist dollars. “For me (and, I suspect, for many others) it’s about the “wildness” of the place: “wildness”, but not necessarily wilderness. This “wildness” has been lost in so many other parts of the world. For many of us who visit Tasmania, it’s all about the feeling of being somewhere that has largely escaped the worst ravages of rampant development. “It’s the clean,...

In June 2017 I posted on Facebook inviting people to complete a survey, asking what they’d like to see if I was able to get back on the small screen with a fishing show of my own. I was overwhelmed by the level of response to this little survey, and I figured some folks might like to see the results (below). I’d also like to take this opportunity to sincerely thank everyone who took the time to complete the survey, or to comment on the Facebook post. I really appreciate your feedback. The good news is that it actually looks like it’s happening and I’ll be back on telly later this year! More on that soon… meanwhile, here are the key findings of the survey, in graphical form, and don’t forget that you can also catch up with me on my “Starlo Gets Reel” YouTube channel:           If you have any comments, please feel free to make them below, or on my StarloFishing page on Facebook… and once again,...

In this fourth part of my ongoing blog series about our new Beastmaster Boats Snubby 500 rig, I reveal the “vital statistics” of the boat and share a few recent images of it in action. If you’d like to read Part 1, click here. For Part 2, click here. And for Part 3, click here. Also, don’t forget that you can watch a short video of the boat’s maiden voyage right here. Okay, down to business!   VITAL STATISTICS: BEASTMASTER SNUBBY 500* LENGTH: 5.0 metres (16′ 6″) BEAM: 1.98 metres (6′ 6″) HULL DEPTH: 0.76 metres (2′ 6″) HULL SIDES: 0.57 metres (1′ 11″) DRAFT: 0.26 metres (10″) DRY HULL WEIGHT: approx. 375 kilos (827 lb) * Explanatory Notes: Measurements quoted are generally to within a few millimetres and all conversions to imperial have been rounded up or down to nearest inch or pound. Hull Depth refers to the maximum depth from gunwale tops/coamings to the deepest part of hull. Hull Sides are flat sides from coamings to chines. Draft (vertical distance between the waterline and deepest part of keel) is an approximate figure (+/- 10%) for the unladen hull and will depend on weight added, load distribution, salinity of water, etc. For this reason, the draft shown should be regarded as a minimum under ideal conditions. Dry Hull Weight is an approximate figure (+/- 10%) and obviously does not include motor, batteries, fuel, electronics, safety gear and other equipment. Next time we’ll have a look at the Yamaha F70A four-stroke outboard fitted to the Snubby, along with the MotorGuide Xi5 bow-mounted electric trolling motor, Lowrance electronics and various other fittings. Until then, tight lines… and meanwhile, here are a few more images of the rig in action:   For more, follow me on...

Let me share an amusing little story that helps explain just how well the unique camouflage patterning on the Starlo’s Finesse Fishing Wear I designed for Mad Keen Australia actually works: During February 2017, Jo and I competed in the final round of the annual Australian Freshwater Masters tournament series. This round was staged at Lake Mulwala, on the Murray River, with the iconic Murray cod as its target species. The comp’ coincided with an incredible heat wave that saw the mercury climbing well into the mid-40 degree Celsius range on three consecutive days. It was so damn hot that I took to slipping over the gunnel of the boat into the lake and having a soak a few times each day to cool down. I’d leave my clothes on for these dips (including my SFF shirt), as the damp material helped lower my core temperature after I climbed back on board. Besides, it only took 15 minutes or so to completely dry out in that heat! During one of these short dips, I was hanging off the transom of the boat when Jo (who fished on through it all like the trooper she is) let out a shout and announced that she’d hooked another fish. It was a smallish Murray cod and she soon had it alongside the boat. Rather than climbing back aboard, I had Jo pass me the measuring mat so I could measure, unhook and release the fish in the water. Jo snapped a couple of photos of me doing this. Unfortunately, the cod was shy of the legal length, so therefore not a point scorer. With the fish measured and safely unhooked, I cradled it gently in my wet hands and then let it swim free. What happened next...

In this second installment of the Snubby Boat Files, we finally get our new Beastmaster Snubby 500 boat wet. You can watch our short video of the event here, or by simply clicking the play button below: Even a grey, overcast and cool day couldn’t dampen our enthusiasm for giving “Mad Keen” (yes, she’s been officially named!) her first on-water run. Launching was a breeze and everything worked exactly as it should. We puttered slowly up through the 8-knot zone, then gradually increased the power… With the brand-spanking new F70A Yamaha still very much in run-in mode, we needed to frequently vary the revs and only touch full noise very briefly, but we were extremely impressed by the rig’s initial performance. It seems the motor height and prop choice (a Yamaha SS [stainless steel] Talon SDS 14K 13 1/8) were spot on… which is always a huge relief! (Find out more about those amazing Talon SDS props here.) Please note that the preliminary performance figures shown below are with a motor that’s still very new and therefore a tad tight. Also, there was very little additional gear in the boat, apart from basic safety equipment, 10 litres of fuel and two people. Here are the initial speeds we observed (via the GPS) at various revs: INITIAL PERFORMANCE FIGURES 3500 RPM = 15 knots (28 km/h) 4000 RPM = 20 knots (37 km/h) 5000 RPM = 25 knots (46 km/h) 6000RPM = 29 knots (54 km/h) 6100 RPM = 30 knots (55.5 km/h)* * Wide open throttle I’m particularly impressed by being able to sit on 20 knots or a whisker over (around 40 km/h) at 4000 to 4200 RPM, as this is an extremely economical mode of operation. I’d expect to be covering close...

He’d been lying there, wide awake, for at least an hour when the bedside alarm finally sounded its shrill, electronic squawk. Out in the darkened driveway, the boat was fuelled and hooked to the car, every item of gear meticulously organised and packed from the night before. The weather report was benevolent and he knew the fish were biting. But a heavy weight pressed down on the man’s chest, while dense, black clouds swirled endlessly inside his head. Every thought that careened through his seething brain was a negative one, every perceived outcome a disappointment or total disaster. Minutes ticked by, dragging into another hour, and the eastern sky began to lighten perceptibly as he wrestled with his inner demons, drowning in those fathomless clouds of swirling darkness. For the hundredth time since waking, he turned fitfully from one side to the other, now drawing his knees up toward his chest as he attempted to curl into a tight, defensive ball. Kookaburras began laughing raucously on the power poles right outside the window. It seemed as if they were mocking and jeering his weakness. The man squeezed his eyes more tightly shut, but the boiling clouds of blackness still filled his head. He wouldn’t fish today… He might not even get out of bed. What was the point? What was the point of anything? Depression… Society’s reaction to that three-syllable word has shifted dramatically in just a few generations. For our grandparents, it triggered memories of a period of unprecedented financial hardship sandwiched between the great wars of the 20th century. For them, the notion of depression as a mental state or even an illness was less familiar. Everyone experienced sadness or stress in their lives, but they were expected to “get over it”....

For at least a decade now, kayak fishing has been one of the fastest growing sectors of the angling scene here in Australia, as well as in many other parts of the world. Interestingly, this phenomenon shows little sign of slowing. Sales of kayaks and related paraphernalia continue to boom, marking this as one of the strongest niches in the marine and boating industry. I must admit that I’ve been a little slow to embrace the whole kayak “thing”. I spent lots of time sitting (usually with a wet bum) in various Canadian-style canoes throughout my early fishing career, and I was delighted when I could finally afford to graduate to a “real” boat. Don’t get me wrong: canoes have their place, and I’ve enjoyed some wonderful times in them. However, once you’ve fished from a craft that’s sufficiently large and stable to stand up in, especially one with a raised casting deck, it’s very hard to willingly go back to the low, cramped, unstable and often wet confines of a canoe. There were also other factors holding me back from kayak fishing. One was a perception that many ’yak fishers, as well as those who catered to their equipment needs, seemed to be missing the whole point of simple, minimalist boating. Some of the ’yak rigs I saw on the water and in magazines or videos had more “fruit” hanging off them in the way of electronics and accessories than my 4.8 metre trailer boat! Some actually required dedicated trailers of their own just to get them to the water’s edge, and half an hour or more of fiddling, tweaking and setting up before they were good to go. Wasn’t portability and ease of use supposed to be the whole point of ’yakking?...

PLEASE NOTE: This blog is accompanied by a video clip on my Starlo Gets Reel channel on YouTube, which you’ll find by clicking here, or going to https://youtu.be/YX6sMZf1cBU. As a full-time fishing writer and presenter, a big part of my job obviously involves capturing photographic images and video to accompany my work, so cameras are important tools for me. My main work camera is a big, heavy, full-frame DSLR (currently a Nikon D610) with a bunch of different lenses, but I also like to carry a compact point-and-shoot: both as a back-up, and for those times when I simply need something smaller and lighter. Over the 40 years or so that I’ve been writing for magazines, I’ve owned lots of cameras. I’ve eventually worn most out, broken them or drowned them… The fishing world’s a pretty harsh environment for sophisticated optical equipment! Through all of that time, I’ve always been on the lookout for the “ultimate” fisherman’s camera, and I reckon I might have finally found something close to that mark with Nikon’s AW1. While it’s certainly not the perfect solution, it ticks enough boxes on my list to come very, very close. The AW1 is a reasonably compact, mirror-less camera with interchangeable lenses that’s capable of capturing 14.2 megapixel images in both RAW and JPEG formats via a reasonable-sized sensor… Those are all good things. But the best thing about this camera in my book is the fact that it’s fully waterproof! Not just “splash-proof”, but actually waterproof! Without any form of housing or additional case, it’s rated to a depth of 15 metres, or almost 50 feet… That’s pretty impressive! It’s also rated as shock-proof if dropped onto a hard surface from a height of 2 metres… Ouch! The AW1 is sealed...

The third and final round of the hard-fought Australian Freshwater Masters tournament series was staged in mid-February this year on the waters of Lake Mulwala, a picturesque impoundment straddling the NSW/Victorian border, an hour or so west of Albury. This unique, three-stage challenge targets a trio of iconic Australian native species at three very different venues. The first round of the latest Freshwater Masters took place last November on Lake Windamere, near the NSW regional town of Mudgee, and was devoted to the pursuit of golden perch or yellowbelly. A few days later, round two was staged on Glenbawn Dam, in the Hunter Valley, with Australian bass as the nominated target species. Finally, almost three months later, competitors gathered at Lake Mulwala to hunt the elusive Murray cod. A catch-and-release series devoted entirely to lure and fly fishing, The Australian Freshwater Masters challenges its field of two-person teams to measure, photograph and release up to 10 legal specimens of each target species at each arena over the course of two days’ of intensive fishing. Cumulative point scores (one point per millimeter) carry forward from round to round, ultimately deciding the outcome of the event. This year, the eventual winners were Team Starlo’s Squidgies, consisting of high profile fishing communicator, Steve ‘Starlo’ Starling, and his wife Jo. Consistent performances in rounds two and three allowed Starlo and Jo to hold onto the significant lead they’d amassed on Windamere’s goldens in round one (where Jo was also the individual champion angler), finally giving them an 800 point break over the second-placed Jigheads Team of Mitchell Skeers and Brad Gardiner. A further 1,300 points behind in third place was Team Windybanks, made up of Simon McAlpine and David Dobson. Overall Champion Angler for the Masters was Mitchell...

Here’s a fantastic new option for mainland anglers planning a Tasmanian fishing trip! The acronym “FIFO” stands for fly-in, fly-out and is most often used in relation to remote mining operations employing workers who fly to the site to commence their week or fortnight of shifts, then fly home afterwards for a break with their families. However, with the advent of fully-equipped “turn-key” hire packages of vehicles and boats, the FIFO concept now has genuine relevance in fishing circles as well! In late spring 2015, my wife Jo and I took advantage of exactly such a business that’s now operating on the island state of Tasmania. The brainchild of Ulverstone tackle shop proprietor, Clinton Howe, Tassie Boat Hire kicked off in mid-2015 offering a single boat rig and 4WD vehicle, but has already begun expanding with the addition of new hire packages. Jo and I were picked up from Launceston airport upon our arrival by Clinton in his first full rig: a 420 Quintrex Renegade towed by a 2011 model Mitsubishi Triton dual cab ute. Clinton drove to a nearby service centre to run us through the rig and complete the necessary paperwork, and then we were off under our own steam for a wonderful week in the Central Highlands chasing Tasmania’s famous wild trout on fly. From the outset, Jo and I were totally blown away by Clinton’s professionalism and the incredibly high standard of every component of the hire gear, from vehicle, boat and trailer to the smaller but equally important stuff like safety gear, battery charger, drift drogue (sea anchor), marine radio and on-board electronics. Everything worked exactly as it was meant to! Tassie Boat Hire’s 420 Quintrex Renegade is powered by a 40HP Evinrude 2-stroke motor on the stern, has...

Lots of anglers still struggle to crack the bream-on-lures code. Truth is, these fish are no pushover. But if you follow my simple, five-point plan below, and watch the accompanying video clip here, I’m confident you’ll be posing for a photo with your first bream on a soft plastic very soon! As I travel the country fishing, researching stories and gathering material for this blog and the many publications I contribute to, I come across increasing numbers of anglers who’ve embraced lure fishing and, in particular, the use of soft plastic lures. The uptake of soft plastics has definitely been one of the most significant trends in Australian recreational angling over the past 10 to 15 years, and its popularity shows no sign of diminishing any time soon. Softies are great lures and they’re not all that hard to use. Most new chums start catching at least the odd fish very early in their plastic-flicking careers. But some species are tougher nuts to crack than others, and the humble bream is perhaps the trickiest of the lot. It’s also the one I get asked about the most. The question typically begins with a statement along the lines of: “I can catch plenty of flathead on plastics, but I’m damned if I can work these bream out!” If you’re in that camp, I’m here to help! Below I’ve listed a simple, five-step strategy for cracking the bream-on-plastics code, and this is accompanied by this short, no-nonsense how-to video clip on my “Starlo Gets Reel” YouTube channel. You can go straight to that video by scanning the QR code at the bottom of this page, or by typing this URL into your browser: www.youtube.com/watch?v=8wuLI5-M3UQ Okay… Are you ready to learn how to catch your very first...

Here’s my first video review (below) of some of the features I like best about the MotorGuide Xi5 (with PinPoint GPS): a sophisticated, bow-mounted electric motor , or “trolling motor”, as our American friends call them. I also have a thorough write-up and evaluation of this unit coming up in the July, 2015 editions of the three Fishing Monthly Magazines (QLD, NSW and VIC/TAS) and will blog that review here on StarloFishing after it has appeared in those publications. Don’t forget you can follow me on Facebook via my StarloFishing page, and subscribe to my YouTube channel: Starlo Gets Reel. Tight Lines!...

By now, quite a few anglers have become aware of a new player on the fishing line market called GLISS, or GLISS KG, manufactured by German company WFT (World Fishing Tackle). Some are touting this stuff as the potential replacement for existing braided and fused gel-spun polyethylene fishing lines, others as a cross-over between braided lines and monofilament… while still others are panning it as an abject fail… So, what’s the real story? I first became aware of GLISS after reading this article on the Angling International website during 2014. Since then, Angling International have run several more pieces/press releases about the line, including this one (followed shortly thereafter by this clarification), then this piece earlier in 2015, and most recently, this report about GLISS KG winning the award for best new braided line at the 2015 EFTTEX Show in Europe. (Click on the highlighted links in the previous sentence to read each of the write-ups, or find out more about EFTTEX.) According to these reports and other research I’ve done, GLISS is made from extruded and fused HMPE ( high modulus polyethylene) fibres. HMPE is widely used in high quality marine ropes, tow lines, etc. In a fishing context, it’s claimed to have very low stretch (like braid), to be ultra smooth (like mono), and to have ridiculously thin diametres for its strength… Reading those descriptions, I just had to get hold of some and try it, as it sounded perfect for a lot of the styles of “finesse” fishing I do… Tracking down some WFT GLISS wasn’t easy. Eventually, I ordered a spool of 6kg in the translucent finish on-line from a British mail order business (6 kg was the lightest they had in stock). After waiting several weeks for the line...

The “Lure of Trout” live-in workshop that Jo and I ran at Lake Crackenback Resort & Spa in the Australian Snowy Mountains during early November, 2014 was a great success and seems to have been enjoyed enormously by all participants. Watch the short video below for a taste of the workshop’s highlights. We’re planning more of these residential workshops for 2015 and beyond, so if you’d like to be involved, lodge an obligation-free expression of interest by clicking here. You should also check out our other hosted trips to exciting destinations by clicking here....

I’d just like to take this opportunity to wish all the friends and followers of my StarloFishing blogsite and my dedicated page on Facebook a safe, happy and fish-filled Christmas and a wonderful New Year! I look forward to bringing you lots more valuable fishing information, news and ideas in 2015 and beyond… And I have some very exciting new projects in the pipeline, too! If you want to be sure not to miss any of them, go to the www.starlofishing.com home page right now, scroll to the very bottom of the page and subscribe. It’s as simple as typing your email address into the space provided before hitting the SUBSCRIBE button. It’s totally free, and you can unsubscribe at any time… How’s that for a great Christmas present from Santa Starlo? Catch you soon. Cheers & Tight Lines,...

It’s not every day that you get to launch a comprehensive range of hard-bodied lures and semi-soft topwaters onto the Australian market, knowing that each lure will retail for $10 or less, yet still be an excellent fish catcher, with a classy finish and better-than-average hardware. However, that’s what I’m happy to say I’ve been able to do with my new STARLO PRO Lures range, designed and selected by me exclusively for the BCF chain of stores here in Australia. Now, I realise from past comments here and elsewhere that not every Aussie angler is necessarily a huge fan of BCF. There’s no doubt that the big chains (including BCF) have led to the demise of some small independent tackle stores, just as the competition from Coles and Woolworths has resulted in a reduction in numbers of local grocery outlets, butcher shops and so on. Nonetheless, for better or worse, I suspect there’s a certain inevitability to this sort of evolution in the world of retail. It’s also true that the better independents (in all fields, including fishing tackle) will not only survive but thrive in the face of such competition. They achieve this by providing the sort of expert advice, individualised customer service and “value adding” that most chains simply can’t or won’t offer. Meanwhile, BCF and their ilk do provide an excellent service to a great many customers, employ a heap of Aussie workers in the process, and don’t, in my experience, indulge in the sort of “crazy, crazy, crazy!” unsustainable discounting that could damage the industry. So, I’m more than happy to be involved with sourcing and designing exclusive lines of tackle for them, just as I have on occasion for other companies.         Anyway, if you’d like...