In the opinion of many anglers (myself included), “sight-fishing” is the most exciting form of fishing ever devised. Seeing your prey before you make a cast and then watching its reactions to your bait, lure or fly lifts fishing to another level altogether, and really ratchets up the “hunting” aspects of our wonderful pastime… It’s also highly addictive! Whether you prefer to use natural baits, lures or artificial flies, I believe that there’s simply no bigger thrill in the whole wide world of fishing than sneakily stalking your visible prey, carefully placing your offering in front of it and watching what happens next. I defy anyone not to hold their breath and tense every muscle in their body with delicious anticipation as that target fish closes in on the trap you’ve just set. It matters little whether it’s a beautiful, wild brown trout tailing in the margin of a shallow lake, a fat, blue-nosed bream mooching under an estuary snag, a lumpy golden trevally hunting across a tropical sand flat… or even a stinky old carp mooching through the shallow margins of an outback dam! Time seems to slow and stretch as the seconds tick agonisingly by. Will the fish eat, or will it spook away in alarm at the last moment? For better or worse, once you’ve tasted the sheer delights of sight fishing, “blind casting”, “prospecting” or “flogging the water” will always be a distant second best. THREE KEYS TO SUCCESS NOTE: To read the rest of this blog, you must be a member of “Starlo’s Inner Circle” of Fishotopia.com. To discover all the benefits of belonging and find out how to sign up, simply click...
Hunting Tasmanian Tigers...
posted by Starlo
Most anglers love catching a new species, and that thrill is magnified when it’s a rare or unusual variety, such as the stunningly-marked, hard-fighting tiger trout. While I was in Tasmania last November shooting a couple of episodes of my new “A Fisherman’s Life” television series (exclusive to Fishflicks.tv), I was lucky enough to re-visit one of my favourite private trout fisheries: 28 Gates Luxury Farmstay, not too far out of Gretna, in the beautiful Derwent Valley. I completely understand that people have mixed views about private, pay-to-fish establishments of this sort. However, in my opinion, they have an important part to play in the bigger picture, right alongside completely “wild” fisheries, those supplemented by occasional re-stocking, and public put-and-take waters. Each has its own special charms and challenges. Classy private fisheries such as 28 Gates and my other Tassie favourite — Currawong Lakes, south east of Campbell Town — closely resemble natural fisheries, but with limited access and controlled angling pressure. Their resident fish behave very much like “wild” trout and are rarely a push-over to catch. As a result, these establishments offer an experience that’s far removed from shooting fish in a barrel. Frankly, they can be as tricky as any other venue. The other attraction such private operations can potentially offer is access to fish that might not be widely available in public waters… such as tiger trout! I was very excited to hear that a small number of tigers had been stocked into one of the lovely lakes at 28 Gates, and I secretly hoped that I might cross paths with one of these fascinating critters. Those who’ve seen the second episode of my “A Fisherman’s Life” series on Fishflicks will know that this dream eventually became a reality on...
Tripping The Light Fantastic: Trout On Twigs...
posted by Starlo
For many years, the lightest fly rods I owned were #5 weights. It’s only in the last few seasons that I’ve added a couple of #4s to my arsenal, specifically for smaller water trout work and ultra-light saltwater shenanigans on the likes of mullet and garfish. But I had to admit that there were times when I lusted after an even lighter “twig”, especially to wave at wee trout in tight streams. During my last visit to Tasmania I spent a couple of enjoyable creek sessions throwing minuscule dries off a diminutive #2 or #3 weight (to be honest, I can’t remember exactly which weight, nor what brand it was). This rod came from the collection of affable fishing guide, Roger Butler of Red Tag Trout Tours. Once I got my head around using this soft, short little noodle of a rod (it was just under the 7 foot mark, from memory), I really enjoyed it. Much to Roger’s amusement, I continued to disparagingly refer to that particular twig as “Arthur Rod” (as in “half-a rod”), but he had trouble prying it out of my grip at the end of the day… There’s something about these super light sticks that makes you grin. Recently, I was fortunate enough to be able to borrow a #3-weight Airflo Creek Series rod from David Anderson of twigwater.com (a wonderful on-line resource for those smitten with the featherweight fly bug). David reviewed this delightful little 7′ 6″ rod here on his Twigwater site, and he has done a much better job of describing it than I could ever hope to. I strongly urge you to not only read that review and check out the rest of the site, but also to subscribe to David’s free monthly newsletter, and...
KNELLER LURES ARE BACK!...
posted by Starlo
My good mate Paul Kneller first began making lures professionally a quarter of a century ago, in the early 1990s, under the banner of Deception Lures. He quickly carved a loyal market niche for these beautiful, hand-crafted timber hard bodies. Deception Shrimps, in particular, became the “go-to” lure at places like Lake Windamere, in central western NSW, while his Nippers, Cherax, Yabbies, Palaemons and other models also developed a strong following amongst both fresh and saltwater anglers. The Deception brand was eventually sold to the Brisbane-based Tacspo company around 2004, when Paul and his wife Cheryl opened a tackle shop in Maclean, in far northern NSW. Following this change-over, Paul’s original Deceptions quickly became collector’s items, attracting high prices on the boutique secondhand market. I’m pleased to announce that after a long lay off from making and designing lures, Paul is back with renewed vigour and passion, keen to take his lures to the next level in terms of detail, action and quality. The models shown here are just an entree, with many more lures to be added to the line-up over the coming months and years. Best of all, every Kneller lure is crafted from wood, and Paul insists that this will never change! Here’s a very quick rundown of some of the gems in Kneller’s new range. You can find out more by visiting his page on Facebook here, going directly to his on-line shop here, or emailing Paul at: shake.bake@bigpond.com CHERNOBYL SHAD 55FD The Chernobyl Shad 55FD is a 55mm fat-bodied lure that could be best described as an all-rounder; suited to bass, bigger bream, flathead, estuary perch, trout, sooties and so on. The Chernobyl Shad will dive to around 3 metres on the troll or off a long cast, with...
Fishing With The Black Dog...
posted by Starlo
He’d been lying there, wide awake, for at least an hour when the bedside alarm finally sounded its shrill, electronic squawk. Out in the darkened driveway, the boat was fuelled and hooked to the car, every item of gear meticulously organised and packed from the night before. The weather report was benevolent and he knew the fish were biting. But a heavy weight pressed down on the man’s chest, while dense, black clouds swirled endlessly inside his head. Every thought that careened through his seething brain was a negative one, every perceived outcome a disappointment or total disaster. Minutes ticked by, dragging into another hour, and the eastern sky began to lighten perceptibly as he wrestled with his inner demons, drowning in those fathomless clouds of swirling darkness. For the hundredth time since waking, he turned fitfully from one side to the other, now drawing his knees up toward his chest as he attempted to curl into a tight, defensive ball. Kookaburras began laughing raucously on the power poles right outside the window. It seemed as if they were mocking and jeering his weakness. The man squeezed his eyes more tightly shut, but the boiling clouds of blackness still filled his head. He wouldn’t fish today… He might not even get out of bed. What was the point? What was the point of anything? Depression… Society’s reaction to that three-syllable word has shifted dramatically in just a few generations. For our grandparents, it triggered memories of a period of unprecedented financial hardship sandwiched between the great wars of the 20th century. For them, the notion of depression as a mental state or even an illness was less familiar. Everyone experienced sadness or stress in their lives, but they were expected to “get over it”....
Bait V Lure?
posted by Starlo
Bait versus lure? Which is best? Here are a few nifty graphics from a piece on that subject I prepared for www.fix.com. If you’d like to read the full story, simply click here. Source:...
TASMANIAN ‘FIFO’ FISHING!...
posted by Starlo
Here’s a fantastic new option for mainland anglers planning a Tasmanian fishing trip! The acronym “FIFO” stands for fly-in, fly-out and is most often used in relation to remote mining operations employing workers who fly to the site to commence their week or fortnight of shifts, then fly home afterwards for a break with their families. However, with the advent of fully-equipped “turn-key” hire packages of vehicles and boats, the FIFO concept now has genuine relevance in fishing circles as well! In late spring 2015, my wife Jo and I took advantage of exactly such a business that’s now operating on the island state of Tasmania. The brainchild of Ulverstone tackle shop proprietor, Clinton Howe, Tassie Boat Hire kicked off in mid-2015 offering a single boat rig and 4WD vehicle, but has already begun expanding with the addition of new hire packages. Jo and I were picked up from Launceston airport upon our arrival by Clinton in his first full rig: a 420 Quintrex Renegade towed by a 2011 model Mitsubishi Triton dual cab ute. Clinton drove to a nearby service centre to run us through the rig and complete the necessary paperwork, and then we were off under our own steam for a wonderful week in the Central Highlands chasing Tasmania’s famous wild trout on fly. From the outset, Jo and I were totally blown away by Clinton’s professionalism and the incredibly high standard of every component of the hire gear, from vehicle, boat and trailer to the smaller but equally important stuff like safety gear, battery charger, drift drogue (sea anchor), marine radio and on-board electronics. Everything worked exactly as it was meant to! Tassie Boat Hire’s 420 Quintrex Renegade is powered by a 40HP Evinrude 2-stroke motor on the stern, has...
Some Thoughts On GLISS Line...
posted by Starlo
By now, quite a few anglers have become aware of a new player on the fishing line market called GLISS, or GLISS KG, manufactured by German company WFT (World Fishing Tackle). Some are touting this stuff as the potential replacement for existing braided and fused gel-spun polyethylene fishing lines, others as a cross-over between braided lines and monofilament… while still others are panning it as an abject fail… So, what’s the real story? I first became aware of GLISS after reading this article on the Angling International website during 2014. Since then, Angling International have run several more pieces/press releases about the line, including this one (followed shortly thereafter by this clarification), then this piece earlier in 2015, and most recently, this report about GLISS KG winning the award for best new braided line at the 2015 EFTTEX Show in Europe. (Click on the highlighted links in the previous sentence to read each of the write-ups, or find out more about EFTTEX.) According to these reports and other research I’ve done, GLISS is made from extruded and fused HMPE ( high modulus polyethylene) fibres. HMPE is widely used in high quality marine ropes, tow lines, etc. In a fishing context, it’s claimed to have very low stretch (like braid), to be ultra smooth (like mono), and to have ridiculously thin diametres for its strength… Reading those descriptions, I just had to get hold of some and try it, as it sounded perfect for a lot of the styles of “finesse” fishing I do… Tracking down some WFT GLISS wasn’t easy. Eventually, I ordered a spool of 6kg in the translucent finish on-line from a British mail order business (6 kg was the lightest they had in stock). After waiting several weeks for the line...
THE LURE OF TROUT WORKSHOP...
posted by Starlo
The “Lure of Trout” live-in workshop that Jo and I ran at Lake Crackenback Resort & Spa in the Australian Snowy Mountains during early November, 2014 was a great success and seems to have been enjoyed enormously by all participants. Watch the short video below for a taste of the workshop’s highlights. We’re planning more of these residential workshops for 2015 and beyond, so if you’d like to be involved, lodge an obligation-free expression of interest by clicking here. You should also check out our other hosted trips to exciting destinations by clicking here....
CATCH BREAM ON FLY!
posted by Starlo
For those who missed it. I’ve attached my recent feature on catching big bream on flies from “Barra, Bass & Bream Digest” magazine. And in case the text from the magazine layouts is too small to read on your screen or in this format, I’ve also included the straight text at the bottom of this blog post. Also, if you’d like to find out how to purchase or subscribe to “Barra, Bass & Bream” on-line, go to: http://www.nafa.com.au/ Big Bream On Fly The Ultimate Challenge? What’s the ultimate prize in modern day barra, bass and bream fishing? Catching a metre-plus ’mundi on a surface lure and light tackle? Landing a 60 cm wild bass from a kayak? Pulling a 2 kg bream onto a wave-washed rock ledge in the middle of the night? Starlo rates all of those milestones, but reckons there’s another one that presents even more of a challenge. In his opinion, mastering big bream on fly is the toughest (and perhaps the most rewarding) game in town… Read on and see if you agree! The average, weekend angler no doubt struggles to understand why some of us might actually choose to make our fishing any harder than it needs to be. For many hopefuls, simply catching a feed of fish is a daunting enough prospect, without deliberately adding extra layers of difficulty to the process. Yet, as with any endeavour, those who are seriously engrossed in their passion and spend a lot of time pursuing it eventually look for extra layers of challenge: new peaks to scale and higher marks to attain. In preparing to write this feature, I spent considerable time pondering the bigger challenges fishing has presented me with over the years. In my late teens and early 20s,...
AWESOME ON-LINE FLY MAG’!...
posted by Starlo
I’m really proud to have had my work published in a fantastic on-line “e-zine” called “The New Fly Fisher”. While it’s based in Canada and devoted in large part to North Americanj fly fishing species and locations, “The New Fly Fisher” also carries international features (such as mine on catrching barra and saratoga), along with lots of great gear, technique and fly tying information. It’s loaded with video clips, too! But, best of all, subscription to this wonderful quarterly mag’ is completely and utterly FREE! All you have to do is register here (by clicking on the ‘subscribe now’ tab at top of their home page). Once you’ve registered, you’ll receive an e-mail notification and link each time a new issue comes out. If you’re into fly fishing, fresh or salt, I guarantee you’ll get a lot from following this electronic publication. But even if you’re not a fly fisho, I reckon you’ll really enjoy the photos and videos! Check it out… I guarantee you won’t be disappointed! Anyway, I’ll leave you with a few random spreads from my first feature for “The New Fly Fisher”…...
Starlo Pro Lures Launched!...
posted by Starlo
It’s not every day that you get to launch a comprehensive range of hard-bodied lures and semi-soft topwaters onto the Australian market, knowing that each lure will retail for $10 or less, yet still be an excellent fish catcher, with a classy finish and better-than-average hardware. However, that’s what I’m happy to say I’ve been able to do with my new STARLO PRO Lures range, designed and selected by me exclusively for the BCF chain of stores here in Australia. Now, I realise from past comments here and elsewhere that not every Aussie angler is necessarily a huge fan of BCF. There’s no doubt that the big chains (including BCF) have led to the demise of some small independent tackle stores, just as the competition from Coles and Woolworths has resulted in a reduction in numbers of local grocery outlets, butcher shops and so on. Nonetheless, for better or worse, I suspect there’s a certain inevitability to this sort of evolution in the world of retail. It’s also true that the better independents (in all fields, including fishing tackle) will not only survive but thrive in the face of such competition. They achieve this by providing the sort of expert advice, individualised customer service and “value adding” that most chains simply can’t or won’t offer. Meanwhile, BCF and their ilk do provide an excellent service to a great many customers, employ a heap of Aussie workers in the process, and don’t, in my experience, indulge in the sort of “crazy, crazy, crazy!” unsustainable discounting that could damage the industry. So, I’m more than happy to be involved with sourcing and designing exclusive lines of tackle for them, just as I have on occasion for other companies. Anyway, if you’d like...
TROUT FISHING LAKE LYELL...
posted by Starlo
Check out this great clip produced by the guys at “The Offroad Adventure Show”! [youtube=http://www.youtube.com/watch?v=uBrTANhJZMQ&w=420&h=315]
Picking Plastics: The Selection Process...
posted by Starlo
Over the course of a year, I get to talk to a lot of soft plastics fishers from around the country. Some I meet at seminars and shows. Others I chat with via the various pages on Facebook that I run or help to administer (especially the StarloFishing, Fishingscool and Squidgy Soft Plastics pages), or through my blogs here at www.starlofishing.me Still others send their letters or emails to me via the magazines I write for. However, no matter what the source of the enquiry, one question (or variations of it) dominates the calls for advice that I receive. Typically, that query begins with the words: “What’s the best soft plastic for…?” The rest of that sentence almost always contains a species of fish and a precise location: What’s the best soft plastic for bream in the Patterson Lakes? What’s the best soft plastic for trout in the Murrumbidgee River? What’s the best soft plastic for flathead on the Gold Coast? What’s the best soft plastic for yellowbelly in the Murray? What’s the best soft plastic for redfin in Lake Eildon? What’s the best for barra in the Daly? And so on… I can’t help but smile at the geographic specificity of these well-meaning questions. Anglers clearly have their favourite fishing spots and they seem to expect that the fish they chase in these beloved haunts will behave just a little differently to those living down the road, around the bend or across the border. Generally speaking, this is not the case. I’ve caught redfin perch in the New England rivers of north western NSW, and also in the very “old England” rivers around the historical university city of Cambridge, in Great Britain (where they’re simply known as perch). Rather unsurprisingly, these fish looked...
Customising Soft Plastics #3: What’s Cooking?...
posted by Starlo
In my last two blogs in this series I’ve been exploring the exciting subject of customizing your soft plastic lures to alter their actions, colours and sink rates in order to better suit specific applications, fishing scenarios and target species. As I explained in both of those blogs, this entire subject area of customizing plastics is a branch of tackle tinkering that far too few Aussie anglers appear willing to experiment with. Many seem to believe that these lures must be used in exactly the form supplied for sale by the manufacturer. But as we’ve been discovering, that’s not the case at all! In fact, nothing could be further from the truth. Unlike most hard-bodied offerings, softies lend themselves extremely well to individual input and fine tuning from the angler, allowing you to clearly stamp your own personal identity and fishing preferences on the lures you use. In the first blog on Customising Soft Plastics, I focused on tweaking colours and patterns using various dyes and marker pens to achieve specific results, whether attempting to “match the hatch”, suit the environment, stand out from the pack or simply emulate a successful hard-bodied lure finish. Last time around, in Part 2, we pulled out the scissors, razor blades and hobby knives and started playing with the actual shape, bulk and profile of these versatile lures to adjust their actions, overall sizes and sink rates. This time, I want to look at the intriguing subject of lure hardness and its impact on action, “mouth feel” and durability. So, let’s kick off by tackling the subject of relative hardness in soft lure materials: TO READ THE REST OF THIS BLOG & OTHERS IN THE SERIES, CLICK...
Customising Soft Plastics #2: Trimming...
posted by Starlo
It’s time to continues our look at customising your soft plastic lures with an examination of easy ways in which the size, profile, sink rates and actions of these great lures can be tweaked and manipulated via some simple cutting and shaping: In my last blog about customising soft plastics I explained that this is an avenue of tackle tinkering that too few anglers seem willing to explore. Many seem to assume that these lures must be used in exactly the form they were originally purchased in. Trust me, that’s certainly not the case! I theorized that this hands-off approach to tweaking plastics is most likely a hangover from our hard-bodied luring days. Beyond possibly upgrading some hooks and rings, very few anglers significantly modify their hard lures. But soft plastics are much easier to customise than hard lures, and doing so can produce some surprising results. The big secret is not to be afraid to give it a go! Last time round I focused on “blinging” your plastics by using various dyes and marker pens to alter or enhance their colours and patterns. This time I want to take customising one step further and actually get into playing with the shapes, sizes, profiles, sink rates and actions of our soft plastics. To do this, all you really need is a sense of adventure and a pair of sharp scissors. Making that first step of actually taking the scissors or craft blade to your plastic tails is perhaps the biggest leap of faith required to get into customizing soft plastics. After that, it gets much easier. TO READ THIS BLOG IN FULL & ACCESS OTHERS IN THE SERIES, GO TO “STARLO’S INNER CIRCLE” BY CLICKING...
Snag-Proof Your Soft Plastics!...
posted by Starlo
Rigging your Squidgies and other soft plastic lures “weedless” or “snag-proof” is much easier than many people seem to think! And once they’re rigged this way, it’s possible to cast these lures into places you could never otherwise reach or cover effectively without constantly snagging up your line and losing expensive tackle. Trust me, you’ll catch a lot more fish as a result of adding this little trick to your rigging repertoire. These days, at least 75 – 80% of the plastics I cast for barramundi and saratoga in northern Australian waters are rigged weedless/snag-proof. But these innovative rigging strategies go far beyond those species. The same approach works like a charm on any fish that favours hanging out in or around dense snag, rock or weed cover. Bream, bass, estuary perch, flathead, mangrove jack, fingermark, Murray cod, golden perch (yellowbelly) and even trout can all be targeted very effectively by “Texas-rigging” your softies on wide-gape worm hooks. The most important part of this rigging system is a wide-gaped worm hook, or a jig head or other delivery vehicle that incorporates a wide gape worm hook. These hooks may look a bit odd at first glance, but they work really well. Lots of companies now make this style of hook. Some good ones include Mustad, Owner, Gamakatsu, and VMC. One really interesting new addition to the wide gape worm hook field is the KVD Grip-Pin hook from Mustad. This clever hook incorporates a little pin that helps keep the head of the rigged plastic in place, preventing it from being too easily ripped free or scrunched down into the hook bend by a striking fish. Another very innovative presentation vehicle for this style of rigging is the TT Lures Snake Head. The best way to...