On 15 January, 2019, I received some very exciting news from NSW DPI Fisheries. It seems that a large dusky flathead I tagged and fin-clipped for DNA analysis on 16th October, 2018 had recently been recaptured and re-released. The fish measured 84.5 cm when I caught it in mid-October, in the lower reaches of Tuross Lake. On 4th January, 2019, when recaptured by Ian “Hoots” Cowie, it had grown to 86.5 cm (that’s 2 cm of growth in just 80 days!) and had moved at least two nautical miles (close to 4km) up the Tuross River. It was also in excellent condition at the time of recapture and had clearly put on weight. The fish swum away very strongly when released the second time. (As an interesting side note, Ian reports that there was quite a bit of weed growth on the tag that had to be scraped off to reveal the serial number.) Interestingly, this fish was hooked quite deeply when I caught it on a big, un-weighted soft plastic, requiring the use of long-nosed pliers to remove the hooks, and it did bleed slightly. It was then held in the circulating live-well aboard my boat for approximately 20 minutes and transported several hundred metres to the boat ramp so that I could meet my wife Jo and John Suthern from the Tuross Heads Fishing Club, who had the fin-clip sampling kit. None of those original handling parameters were optimal or ideal, yet the fish not only survived, but clearly thrived. For me, this is EXCELLENT news and bodes very well for the survival of large flathead that can be quickly unhooked and released with minimal handling at or near the capture sight, as recommended. (For details on how to best handle flathead...
SIGHT FISHING BASICS
posted by Starlo
In the opinion of many anglers (myself included), “sight-fishing” is the most exciting form of fishing ever devised. Seeing your prey before you make a cast and then watching its reactions to your bait, lure or fly lifts fishing to another level altogether, and really ratchets up the “hunting” aspects of our wonderful pastime… It’s also highly addictive! Whether you prefer to use natural baits, lures or artificial flies, I believe that there’s simply no bigger thrill in the whole wide world of fishing than sneakily stalking your visible prey, carefully placing your offering in front of it and watching what happens next. I defy anyone not to hold their breath and tense every muscle in their body with delicious anticipation as that target fish closes in on the trap you’ve just set. It matters little whether it’s a beautiful, wild brown trout tailing in the margin of a shallow lake, a fat, blue-nosed bream mooching under an estuary snag, a lumpy golden trevally hunting across a tropical sand flat… or even a stinky old carp mooching through the shallow margins of an outback dam! Time seems to slow and stretch as the seconds tick agonisingly by. Will the fish eat, or will it spook away in alarm at the last moment? For better or worse, once you’ve tasted the sheer delights of sight fishing, “blind casting”, “prospecting” or “flogging the water” will always be a distant second best. THREE KEYS TO SUCCESS NOTE: To read the rest of this blog, you must be a member of “Starlo’s Inner Circle” of Fishotopia.com. To discover all the benefits of belonging and find out how to sign up, simply click...
Flying Flathead!
posted by Starlo
With the growing interest these days in fly fishing — especially in saltwater — I thought I’d have a close look at one of the more readily available estuarine and inshore species, and one that represents an ideal starting point for a bit of “swoffing”. That fish is the humble flathead. But first, a few thoughts on fly-fishing in general: WHAT IS FLY FISHING? Fly-fishing has a reputation for being a mysterious and difficult art, mostly practiced by crusty, pipe-smoking old toffs in tweed jackets resplendent with leather elbow patches… But the times have indeed changed! These days, fly-fishing has largely been de-mystified, and it’s also no longer solely about catching trout… nor even fishing only in freshwater. The biggest trick to breaking down any remaining misconceptions surrounding fly fishing is to accept that it’s really no more than a specialised form of lure fishing, in which the “lure” is too light or too wind resistant to be cast any serious distance using conventional spinning or baitcaster tackle… Simple as that! Flies are just artificial baits, exactly like any other lure. However, being made from fur, fibres, tinsel and feathers lashed to a hook with thread, they’re virtually weightless. This presents a challenge from the casting perspective. Through the centuries, that challenge has been overcome by incorporating the necessary casting weight into the line instead of the lure. So, a fly line is effectively no more or less than a long, skinny sinker or float! Its weight or mass is used to deliver that lightweight lure to a fish. The best way to throw such a long, skinny casting weight is to swish it back and forth through the air in order to form a travelling loop that can be extended and then unfurled...
THE SNUBBY BOAT FILES: PART 4...
posted by Starlo
In this fourth part of my ongoing blog series about our new Beastmaster Boats Snubby 500 rig, I reveal the “vital statistics” of the boat and share a few recent images of it in action. If you’d like to read Part 1, click here. For Part 2, click here. And for Part 3, click here. Also, don’t forget that you can watch a short video of the boat’s maiden voyage right here. Okay, down to business! VITAL STATISTICS: BEASTMASTER SNUBBY 500* LENGTH: 5.0 metres (16′ 6″) BEAM: 1.98 metres (6′ 6″) HULL DEPTH: 0.76 metres (2′ 6″) HULL SIDES: 0.57 metres (1′ 11″) DRAFT: 0.26 metres (10″) DRY HULL WEIGHT: approx. 375 kilos (827 lb) * Explanatory Notes: Measurements quoted are generally to within a few millimetres and all conversions to imperial have been rounded up or down to nearest inch or pound. Hull Depth refers to the maximum depth from gunwale tops/coamings to the deepest part of hull. Hull Sides are flat sides from coamings to chines. Draft (vertical distance between the waterline and deepest part of keel) is an approximate figure (+/- 10%) for the unladen hull and will depend on weight added, load distribution, salinity of water, etc. For this reason, the draft shown should be regarded as a minimum under ideal conditions. Dry Hull Weight is an approximate figure (+/- 10%) and obviously does not include motor, batteries, fuel, electronics, safety gear and other equipment. Next time we’ll have a look at the Yamaha F70A four-stroke outboard fitted to the Snubby, along with the MotorGuide Xi5 bow-mounted electric trolling motor, Lowrance electronics and various other fittings. Until then, tight lines… and meanwhile, here are a few more images of the rig in action: For more, follow me on...
A FUNNY THING HAPPENED ON THE WAY TO THE SNAG: OR HOW CAMOUFLAGE REALLY WORKS!...
posted by Starlo
Let me share an amusing little story that helps explain just how well the unique camouflage patterning on the Starlo’s Finesse Fishing Wear I designed for Mad Keen Australia actually works: During February 2017, Jo and I competed in the final round of the annual Australian Freshwater Masters tournament series. This round was staged at Lake Mulwala, on the Murray River, with the iconic Murray cod as its target species. The comp’ coincided with an incredible heat wave that saw the mercury climbing well into the mid-40 degree Celsius range on three consecutive days. It was so damn hot that I took to slipping over the gunnel of the boat into the lake and having a soak a few times each day to cool down. I’d leave my clothes on for these dips (including my SFF shirt), as the damp material helped lower my core temperature after I climbed back on board. Besides, it only took 15 minutes or so to completely dry out in that heat! During one of these short dips, I was hanging off the transom of the boat when Jo (who fished on through it all like the trooper she is) let out a shout and announced that she’d hooked another fish. It was a smallish Murray cod and she soon had it alongside the boat. Rather than climbing back aboard, I had Jo pass me the measuring mat so I could measure, unhook and release the fish in the water. Jo snapped a couple of photos of me doing this. Unfortunately, the cod was shy of the legal length, so therefore not a point scorer. With the fish measured and safely unhooked, I cradled it gently in my wet hands and then let it swim free. What happened next...
WINNING WAYS: Three Dams, Three Strategies...
posted by Starlo
The Australian Freshwater Masters is a unique tournament series that pitches teams of anglers against each other across a time frame of several months at three very different venues, targeting a trio of iconic native species. Jo and I competed in The Freshwater Masters for the first time in 2015/16, and were fortunate enough to ultimately win the event… Here’s the inside story of exactly how we did it: The Australian Freshwater Masters is an innovative tournament series first conceived by well-known Aussie lure maker, Wayne Lennon, some two decades ago. Wayne successfully ran the annual event for many years before handing the reins to Dave Silva. Later, Dave Shelton picked up the baton and, in more recent times, has been ably assisted by Matt Cunneen, creator of Gangster Lures in Wagga. As of last year, Matt is now running the event largely by himself. The Masters is a brilliant concept, with three rounds taking place on three very different waterways, targeting a trio of our most popular and iconic freshwater natives: golden perch, Australian bass and Murray cod. Teams consist of two anglers, and their cumulative scores carry forward from one round to the next, eventually deciding the overall champions. It’s definitely a concept that rewards versatility, determination and consistency of performance. The Masters is a lure-and-fly only event, with both casting and trolling allowed and, naturally, it’s all about catch-and-release. Live fish are photographed on standard issue Fisheries measuring mats and, where possible, witnessed by another team, although the welfare of the fish always comes first, so if there are no witnesses nearby, a date-stamped digital photo is acceptable. While ostensibly an invitational series, expressions of interest from new teams are invited every year and are generally accepted, at least until the...
KNELLER LURES ARE BACK!...
posted by Starlo
My good mate Paul Kneller first began making lures professionally a quarter of a century ago, in the early 1990s, under the banner of Deception Lures. He quickly carved a loyal market niche for these beautiful, hand-crafted timber hard bodies. Deception Shrimps, in particular, became the “go-to” lure at places like Lake Windamere, in central western NSW, while his Nippers, Cherax, Yabbies, Palaemons and other models also developed a strong following amongst both fresh and saltwater anglers. The Deception brand was eventually sold to the Brisbane-based Tacspo company around 2004, when Paul and his wife Cheryl opened a tackle shop in Maclean, in far northern NSW. Following this change-over, Paul’s original Deceptions quickly became collector’s items, attracting high prices on the boutique secondhand market. I’m pleased to announce that after a long lay off from making and designing lures, Paul is back with renewed vigour and passion, keen to take his lures to the next level in terms of detail, action and quality. The models shown here are just an entree, with many more lures to be added to the line-up over the coming months and years. Best of all, every Kneller lure is crafted from wood, and Paul insists that this will never change! Here’s a very quick rundown of some of the gems in Kneller’s new range. You can find out more by visiting his page on Facebook here, going directly to his on-line shop here, or emailing Paul at: shake.bake@bigpond.com CHERNOBYL SHAD 55FD The Chernobyl Shad 55FD is a 55mm fat-bodied lure that could be best described as an all-rounder; suited to bass, bigger bream, flathead, estuary perch, trout, sooties and so on. The Chernobyl Shad will dive to around 3 metres on the troll or off a long cast, with...
THE SNUBBY BOAT FILES: PART 3...
posted by Starlo
In this third part of my ongoing blog series about our new Beastmaster Boats Snubby 500 rig, I take a look at some of the accessories we’ve added to the boat. If you’d like to read Part 1, click here, and for Part 2, click here. Batteries are something many people don’t think much about when it comes to setting up a new boat. However, they are vitally important components in a well-equipped rig. My fellow Offroad Adventure Show presenter, Jamie Hazelden from Jamie’s Touring Solutions (JTS) had been waxing lyrical about the new Lead Crystal Batteries, and after checking them out on-line, I could understand why he was so excited! Anyway, to cut a long story short, we ended up fitting two: a dirty big 120 amp hour unit up front to power the MotorGuide Xi5 bow-mounted electric and a smaller 80Ah battery down in the stern for cranking the Yammy and running the sounders, etc. It’s early days yet, to be sure, but so far I’m blown away by the performance of both batteries. The major claims to fame of these state-of-the-art batteries are an extremely long shelf life with a very low discharge rate when stored (you can store them for two years without any top up charging!). They also have the ability to cope with high discharge rates, a very fast re-charging time, and deep discharge capabilities. As a bonus, they’re made to deal with extremely harsh conditions in terms of temperature range, vibration and so on… All-in-all, exactly what the doctor ordered for tough marine use! (Go to the very bottom of this page for a listing of the major advantages of Lead Crystal batteries.) I’ll be sure to keep you up to speed with our observations about these...
Native Watercraft Ultimate FX Propel 13: First Impressions...
posted by Starlo
From the moment I first set eyes on the Native Watercraft FX Propel 13 pedal-powered kayak on the company’s American website (see here), I just knew I had to have one of these mean machines! Along with my wife Jo, I’ve been a Native Watercraft fan for quite a few years now, and this latest release from the company looked to be the perfect upgrade from my much-loved Mariner 12.5 (see my video about that now-discontinued boat here). So, I immediately placed an order with Native Watercraft Australia for an Ultimate FX from the first shipment destined to reach this country, which was due to arrive on our shores in October/November, 2016. My trip to Melbourne to pick up the shiny new Ultimate happily coincide with me also taking delivery of a fantastic, purpose-built, duo kayak trailer from Redide Trailers (something I’ll be blogging about in detail very soon!). Naturally, I was itching to get the new machine wet, but writing deadlines and poor weather conspired against this for a few days. Finally, a narrow window of opportunity opened and I managed to sneak out for a late afternoon bass fishing session on the freshwater reaches of a river not too far from home. From almost the moment I slid the Ultimate into the water and climbed aboard, I knew I’d made the right decision. A hybrid between a more traditional “sit-in” style kayak/canoe and the newer generation of “sit-on” yaks, the Ultimate has a noticeably higher seating position than either my old Mariner or the company’s more recent flagship: the Slayer. The new boat is also a tad lighter. That raised seating position translates to a significantly higher comfort level for my ageing bones and muscles, and also seems far more efficient when...
How I Learned To Love The Yak!...
posted by Starlo
For at least a decade now, kayak fishing has been one of the fastest growing sectors of the angling scene here in Australia, as well as in many other parts of the world. Interestingly, this phenomenon shows little sign of slowing. Sales of kayaks and related paraphernalia continue to boom, marking this as one of the strongest niches in the marine and boating industry. I must admit that I’ve been a little slow to embrace the whole kayak “thing”. I spent lots of time sitting (usually with a wet bum) in various Canadian-style canoes throughout my early fishing career, and I was delighted when I could finally afford to graduate to a “real” boat. Don’t get me wrong: canoes have their place, and I’ve enjoyed some wonderful times in them. However, once you’ve fished from a craft that’s sufficiently large and stable to stand up in, especially one with a raised casting deck, it’s very hard to willingly go back to the low, cramped, unstable and often wet confines of a canoe. There were also other factors holding me back from kayak fishing. One was a perception that many ’yak fishers, as well as those who catered to their equipment needs, seemed to be missing the whole point of simple, minimalist boating. Some of the ’yak rigs I saw on the water and in magazines or videos had more “fruit” hanging off them in the way of electronics and accessories than my 4.8 metre trailer boat! Some actually required dedicated trailers of their own just to get them to the water’s edge, and half an hour or more of fiddling, tweaking and setting up before they were good to go. Wasn’t portability and ease of use supposed to be the whole point of ’yakking?...
Bait V Lure?
posted by Starlo
Bait versus lure? Which is best? Here are a few nifty graphics from a piece on that subject I prepared for www.fix.com. If you’d like to read the full story, simply click here. Source:...
STARLO & JO WIN THE AUSTRALIAN FRESHWATER MASTERS!...
posted by Starlo
The third and final round of the hard-fought Australian Freshwater Masters tournament series was staged in mid-February this year on the waters of Lake Mulwala, a picturesque impoundment straddling the NSW/Victorian border, an hour or so west of Albury. This unique, three-stage challenge targets a trio of iconic Australian native species at three very different venues. The first round of the latest Freshwater Masters took place last November on Lake Windamere, near the NSW regional town of Mudgee, and was devoted to the pursuit of golden perch or yellowbelly. A few days later, round two was staged on Glenbawn Dam, in the Hunter Valley, with Australian bass as the nominated target species. Finally, almost three months later, competitors gathered at Lake Mulwala to hunt the elusive Murray cod. A catch-and-release series devoted entirely to lure and fly fishing, The Australian Freshwater Masters challenges its field of two-person teams to measure, photograph and release up to 10 legal specimens of each target species at each arena over the course of two days’ of intensive fishing. Cumulative point scores (one point per millimeter) carry forward from round to round, ultimately deciding the outcome of the event. This year, the eventual winners were Team Starlo’s Squidgies, consisting of high profile fishing communicator, Steve ‘Starlo’ Starling, and his wife Jo. Consistent performances in rounds two and three allowed Starlo and Jo to hold onto the significant lead they’d amassed on Windamere’s goldens in round one (where Jo was also the individual champion angler), finally giving them an 800 point break over the second-placed Jigheads Team of Mitchell Skeers and Brad Gardiner. A further 1,300 points behind in third place was Team Windybanks, made up of Simon McAlpine and David Dobson. Overall Champion Angler for the Masters was Mitchell...
Catch Your First Bream On A Soft Plastic!...
posted by Starlo
Lots of anglers still struggle to crack the bream-on-lures code. Truth is, these fish are no pushover. But if you follow my simple, five-point plan below, and watch the accompanying video clip here, I’m confident you’ll be posing for a photo with your first bream on a soft plastic very soon! As I travel the country fishing, researching stories and gathering material for this blog and the many publications I contribute to, I come across increasing numbers of anglers who’ve embraced lure fishing and, in particular, the use of soft plastic lures. The uptake of soft plastics has definitely been one of the most significant trends in Australian recreational angling over the past 10 to 15 years, and its popularity shows no sign of diminishing any time soon. Softies are great lures and they’re not all that hard to use. Most new chums start catching at least the odd fish very early in their plastic-flicking careers. But some species are tougher nuts to crack than others, and the humble bream is perhaps the trickiest of the lot. It’s also the one I get asked about the most. The question typically begins with a statement along the lines of: “I can catch plenty of flathead on plastics, but I’m damned if I can work these bream out!” If you’re in that camp, I’m here to help! Below I’ve listed a simple, five-step strategy for cracking the bream-on-plastics code, and this is accompanied by this short, no-nonsense how-to video clip on my “Starlo Gets Reel” YouTube channel. You can go straight to that video by scanning the QR code at the bottom of this page, or by typing this URL into your browser: www.youtube.com/watch?v=8wuLI5-M3UQ Okay… Are you ready to learn how to catch your very first...
Some Thoughts On GLISS Line...
posted by Starlo
By now, quite a few anglers have become aware of a new player on the fishing line market called GLISS, or GLISS KG, manufactured by German company WFT (World Fishing Tackle). Some are touting this stuff as the potential replacement for existing braided and fused gel-spun polyethylene fishing lines, others as a cross-over between braided lines and monofilament… while still others are panning it as an abject fail… So, what’s the real story? I first became aware of GLISS after reading this article on the Angling International website during 2014. Since then, Angling International have run several more pieces/press releases about the line, including this one (followed shortly thereafter by this clarification), then this piece earlier in 2015, and most recently, this report about GLISS KG winning the award for best new braided line at the 2015 EFTTEX Show in Europe. (Click on the highlighted links in the previous sentence to read each of the write-ups, or find out more about EFTTEX.) According to these reports and other research I’ve done, GLISS is made from extruded and fused HMPE ( high modulus polyethylene) fibres. HMPE is widely used in high quality marine ropes, tow lines, etc. In a fishing context, it’s claimed to have very low stretch (like braid), to be ultra smooth (like mono), and to have ridiculously thin diametres for its strength… Reading those descriptions, I just had to get hold of some and try it, as it sounded perfect for a lot of the styles of “finesse” fishing I do… Tracking down some WFT GLISS wasn’t easy. Eventually, I ordered a spool of 6kg in the translucent finish on-line from a British mail order business (6 kg was the lightest they had in stock). After waiting several weeks for the line...
THE LURE OF TROUT WORKSHOP...
posted by Starlo
The “Lure of Trout” live-in workshop that Jo and I ran at Lake Crackenback Resort & Spa in the Australian Snowy Mountains during early November, 2014 was a great success and seems to have been enjoyed enormously by all participants. Watch the short video below for a taste of the workshop’s highlights. We’re planning more of these residential workshops for 2015 and beyond, so if you’d like to be involved, lodge an obligation-free expression of interest by clicking here. You should also check out our other hosted trips to exciting destinations by clicking here....
CATCH BREAM ON FLY!
posted by Starlo
For those who missed it. I’ve attached my recent feature on catching big bream on flies from “Barra, Bass & Bream Digest” magazine. And in case the text from the magazine layouts is too small to read on your screen or in this format, I’ve also included the straight text at the bottom of this blog post. Also, if you’d like to find out how to purchase or subscribe to “Barra, Bass & Bream” on-line, go to: http://www.nafa.com.au/ Big Bream On Fly The Ultimate Challenge? What’s the ultimate prize in modern day barra, bass and bream fishing? Catching a metre-plus ’mundi on a surface lure and light tackle? Landing a 60 cm wild bass from a kayak? Pulling a 2 kg bream onto a wave-washed rock ledge in the middle of the night? Starlo rates all of those milestones, but reckons there’s another one that presents even more of a challenge. In his opinion, mastering big bream on fly is the toughest (and perhaps the most rewarding) game in town… Read on and see if you agree! The average, weekend angler no doubt struggles to understand why some of us might actually choose to make our fishing any harder than it needs to be. For many hopefuls, simply catching a feed of fish is a daunting enough prospect, without deliberately adding extra layers of difficulty to the process. Yet, as with any endeavour, those who are seriously engrossed in their passion and spend a lot of time pursuing it eventually look for extra layers of challenge: new peaks to scale and higher marks to attain. In preparing to write this feature, I spent considerable time pondering the bigger challenges fishing has presented me with over the years. In my late teens and early 20s,...
Starlo Pro Lures Launched!...
posted by Starlo
It’s not every day that you get to launch a comprehensive range of hard-bodied lures and semi-soft topwaters onto the Australian market, knowing that each lure will retail for $10 or less, yet still be an excellent fish catcher, with a classy finish and better-than-average hardware. However, that’s what I’m happy to say I’ve been able to do with my new STARLO PRO Lures range, designed and selected by me exclusively for the BCF chain of stores here in Australia. Now, I realise from past comments here and elsewhere that not every Aussie angler is necessarily a huge fan of BCF. There’s no doubt that the big chains (including BCF) have led to the demise of some small independent tackle stores, just as the competition from Coles and Woolworths has resulted in a reduction in numbers of local grocery outlets, butcher shops and so on. Nonetheless, for better or worse, I suspect there’s a certain inevitability to this sort of evolution in the world of retail. It’s also true that the better independents (in all fields, including fishing tackle) will not only survive but thrive in the face of such competition. They achieve this by providing the sort of expert advice, individualised customer service and “value adding” that most chains simply can’t or won’t offer. Meanwhile, BCF and their ilk do provide an excellent service to a great many customers, employ a heap of Aussie workers in the process, and don’t, in my experience, indulge in the sort of “crazy, crazy, crazy!” unsustainable discounting that could damage the industry. So, I’m more than happy to be involved with sourcing and designing exclusive lines of tackle for them, just as I have on occasion for other companies. Anyway, if you’d like...
BACK TO BASICS: Spooling Up Part 2...
posted by Starlo
In the first part of this blog series on spooling up your reel, I looked at attaching the end of your line to the spool of your reel before beginning to crank all that line on… Now it’s time to work up a sweat as we finish the job! Hopefully, you’ll remember that in that first part I instructed you to fit the reel to a rod, run the end of the new line down through at least one runner, wrap it several times around the spool core, then secure it firmly in place with a five or six turn Uni Knot. I also stressed that if you’re filling a spinning (threadline) reel, you’ll need to open the bail arm first, before attaching the line, while if it was a baitcaster, the line would need to pass through the level wind carrier first. After tying that important Uni Knot, tightening it firmly and trimming the knot to leave a one or two centimetre tag, you can actually begin spooling up… This is the physically active part of the process! (Note that if you’re spooling with braided or fused gel-spun polyethylene line, lots of people suggest laying down a base of 15 or 20 metres of mono first and tying your braid to this. To be honest, I don’t usually do this, but it’s not a bad idea.) TO READ THIS REST OF THIS BLOG SERIES, GO TO “STARLO’S INNER CIRCLE”, BY CLICKING...
TROUT FISHING LAKE LYELL...
posted by Starlo
Check out this great clip produced by the guys at “The Offroad Adventure Show”! [youtube=http://www.youtube.com/watch?v=uBrTANhJZMQ&w=420&h=315]
Setting The Drag
posted by Starlo
Most modern fishing reels, regardless of their style or type, are equipped with a drag or “slipping clutch” mechanism of some sort that allows line to be pulled from the reel’s spool under a pre-set tension. On a threadline or spinning reel, drag pressure is usually adjusted via a knob located on the front of the spool or (more rarely) under the rear of the reel’s body. Overheads and baitcasters either have a star wheel under the handle or a lever on the side of the reel for adjusting the drag, while sidecasts and centrepins typically feature a nut or star in the centre of the spool. This drag is intended to prevent the line from breaking should excessive force be placed upon it. Instead of snapping, line slips from the spool against the pre-set drag tension. When a large or powerful fish is hooked, it usually needs to be “played” using a combination of drag resistance and rod work. The term “playing a fish” means taking your time and bringing the fish in more slowly and smoothly while using the flex of the rod as a shock absorber. If necessary, you will also need to allow the hooked fish to “run”: in other words, to pull line from the spool against the reel’s pre-set drag or slipping clutch. This may happen many times during a fight with a strong adversary, especially on lighter line. A big, strong fish can easily pull the rod tip down and rip line off the spool against the resistance of the reel’s drag. However, if the drag has been set too tightly, the line can possibly snap, or the hook might bend or straighten and rip out of the fish’s mouth. On the other hand, if the drag...